Lubrication

The cleaner is equipped with bearings that contain sufficient lubrication for the life of the cleaner. The addition of lubri- cant could cause damage. Therefore, do not add lubricant to any bearings.

Thermal protector

An internal thermal protector has been designed into your cleaner to protect it from overheating.

When the thermal protector activates, the suction motor will stop running, however the agitator will continue to run. If this happens, proceed as follows:

1.Turn the cleaner OFF and discon- nect it from the electrical outlet.

2.Check dirt cup pre-filter, HEPA cartridge filter and final filter for dirt accumulation.

3.Refer to “Clearing blockages” section.

4.When the motor cools, the thermal protector automatically resets and cleaning may continue.

If the thermal protector continues to activate after following the above steps, your cleaner may need servicing (see “Service” section).

4.If you have a problem

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below.

Problem: Cleaner won’t turn on

Possible cause

Possible solution

•Not firmly plugged in

•Plug unit in firmly

•No voltage in wall plug

•Check fuse or breaker

•Blown fuse or tripped breaker

•Replace fuse or reset breaker

•Thermal protector activated

•Allow cleaner to cool (this will reset the thermal protector) (see pg. 12).

•Brush roll shut-off tripped

•Turn cleaner OFF, clear brush roll. Turn cleaner back ON.

Problem: Agitator brushes aren’t turning

Possible cause

Possible solution

•Custom Control™ switch set on BARE FLOOR position.

•Set switch to carpet position

•Agitator is obstructed.

•Clear obstruction

Problem: Cleaner won’t pick up

Possible cause

Possible solution

•Thermal protector activated

•Allow cleaner to cool (this will reset the thermal protector) (see pg. 12).

•Agitator brush roll worn

•Replace brush roll

•Dirt cup full

•Empty dirt cup

•Incorrect carpet height setting

•Turn nozzle control knob to lower setting

•Blockage in air flow passage

•Clear blockage

•HEPA cartridge filter clogged

•Clean HEPA cartridge filter by either tapping the side of the dirt cup or removing the cartridge filter as de- scribed in the “Filter assembly” section.

•Pre-filter clogged

•Clean pre-filter as described in “Filter assembly” section.

•Dirt cup not properly installed

•Position dirt cup properly (Fig. 3-5).

•Dirt cup lid not positioned properly or missing

•Ensure that dirt cup lid is properly positioned.

•Filter assembly not assembled properly

•Ensure that filter assembly is positioned properly (Figs. 3-9 to 3-11).

•Broken or worn belt

•Replace belt

Problem: Cleaner hard to push Possible cause

Possible solution

•Incorrect carpet height setting

•Turn nozzle control knob to a higher setting

•Broken or worn belt

•Replace belt

Problem: Cleaning tools won’t pick up

Possible cause

Possible solution

•Blockage in hose

•Clear blockage.

Problem: Visible dirt leaking through final filter

Possible cause

Possible solution

•Filter assembly not installed properly

•Remove filter assembly from dirt cup and ensure that HEPA cartridge filter is properly attached to pre-filter screen and that entire filter assembly is properly repositioned inside dirt cup. (Figs. 3-6 through 3-11).

Problem: Dirt inside dirt cup stops spinning

Note: Heavy debris may settle to the bottom of the dirt cup and prevent the dirt from spinning without affecting cleaning performance. The cleaner can continue to be used even if the dirt is not spinning inside the dirt cup.

However, if the dirt does stop spinning AND there is a noticeable decrease of performance, check the items under “Cleaner won’t pick up”.

Problem: Powered hand tool brush roll won’t turn

Possible cause

Possible solution

•Too much pressure being applied to tool

•Continue using tool applying light pressure.

•Blockage in turbine channel

•Remove blockage.

•Broken or worn belt

•Replace belt

•Low cleaner suction

•Check items under “Cleaner won’t pick up”.

12

Page 11 Page 13
Page 12
Image 12
Hoover Turbo POWER Upright Vacuum Cleaner owner manual If you have a problem, Lubrication, Thermal protector
Page 11 Page 13

Turbo POWER Upright Vacuum Cleaner specifications

The Hoover Turbo POWER Upright Vacuum Cleaner is a powerful cleaning solution designed to tackle dirt, dust, and debris with ease. Featuring a robust motor and advanced suction technology, this vacuum delivers exceptional performance on various floor types. One of its standout features is the Multi-Cyclonic Filtration System, which separates dirt and debris from the air, ensuring powerful suction that lasts. This technology effectively reduces clogging, helping maintain peak performance even during extensive cleaning tasks.

The Turbo POWER is equipped with a lightweight design, making it easy to maneuver around the home. Weighing in at only 15 pounds, users can lift and transport it without difficulty, getting into those hard-to-reach areas such as stairs and corners. Additionally, the vacuum comes with a large capacity dirt cup, allowing for extended cleaning sessions without frequent interruptions for emptying. This feature proves especially beneficial for larger homes or for those who tackle extensive cleaning projects.

Another notable characteristic of the Hoover Turbo POWER is its advanced brush roll system. The vacuum includes a combination of bristle and rubber wipers that work together to effectively remove embedded dirt from carpets while being gentle enough for hard floor surfaces. This dual-mode functionality allows users to switch between cleaning modes, adapting to the specific needs of their flooring.

Moreover, the vacuum boasts a variety of onboard tools, including a crevice tool, dusting brush, and upholstery nozzle. These attachments provide versatility, enabling users to clean upholstery, tight spaces, and delicate surfaces with ease. Furthermore, the Turbo POWER features a washable HEPA filter that traps 99.97% of dust and allergens, making it an ideal choice for households with allergies or asthma.

With a generous power cord length, users can effortlessly navigate large rooms without constantly changing outlets. The vacuum also features convenient cord storage, allowing for tidy storage when not in use. Finally, the Hoover Turbo POWER Upright Vacuum Cleaner is designed with user-friendly controls, ensuring that anyone can operate it with minimal effort.

In summary, the Hoover Turbo POWER Upright Vacuum Cleaner delivers impressive cleaning capabilities, making it an outstanding choice for any household seeking efficient and effective home cleaning solutions. Its combination of lightweight design, advanced cleaning technologies, and versatile attachments makes it a reliable tool for tackling a variety of cleaning challenges.
Top Page Image Contents