Filter assembly

The HEPA cartridge filter and pre-filter are essentially self-shedding.

Tapping the side of the dirt cup as described in “How to empty dirt cup” should sufficiently remove dust and fine particles from the HEPA cartridge filter and pre-filter.

The filter assembly can also be removed for additional cleaning.

How to clean filter assembly

3-6

Remove dirt cup and dirt cup lid as described in “How to empty dirt cup.”

Grasp pre-filter frame and pull up firmly. Slide filter assembly out of cup.

3-7

Grasp end of HEPA cartridge filter and pull it away from pre-filter. Remove cartridge from assembly.

The pre-filter (A) can be cleaned with a brush and then rinsed with water. Allow pre-filter to dry thoroughly.

3-8

3-9

3-10

A B

Clean the HEPA cartridge filter by tap- ping either of the ends. DO NOT tap soft pleated sides of HEPA cartridge filter as this could damage the filter.

Tap filter until no more dust particles fall from the filter.

DO NOT rinse HEPA cartridge filter with water.

To re-assemble filter assembly, place large knob of HEPA cartridge filter in hole on bottom of pre-filter.

Snap top of HEPA cartridge filter into place.

Align grooves (A) on pre-filter frame with grooves (B) in dirt cup.

3-11

Slide filter assembly down into cup until a light snap is felt. Gently pull up on assembly to ensure that it is seated properly in the cup. Ensure that no part of pre-filter screen extends above top edge of dirt cup.

Replace lid and return cup to cleaner (Fig. 3-4).

Note: If dirt cup lid does not close all the way, ensure that filter assembly is pushed down all the way. Turn knob on lid until lid closes (Fig. 3-3).

Cleaning final filter

3-12
A	B

The final filter assists in returning clean air to the room.

To remove this filter when it becomes dirty, lay handle flat on the floor. Press door tab (A) and remove door.

Lift out filter (B) and hand wash it in cold water with mild detergent.

Let filter air dry and reposition it. Replace door. Snap closed.

Should you want to replace this filter, ask for HOOVER part No. 40110009.

Do not operate cleaner without the fil- ter in place.

Headlight replacement

What to buy

This cleaner uses a 12 volt, wedge base type 912 bulb, HOOVER part No. 27313107.

3-13

Disconnect cleaner from electrical outlet.

Step on handle release pedal and place cleaner in the lowest position. Turn cleaner over. Using a Phillips screw- driver, remove the two screws (A) locat- ed nearest the wheels at the rear of the base of the cleaner.

Turbo POWER Upright Vacuum Cleaner specifications

The Hoover Turbo POWER Upright Vacuum Cleaner is a powerful cleaning solution designed to tackle dirt, dust, and debris with ease. Featuring a robust motor and advanced suction technology, this vacuum delivers exceptional performance on various floor types. One of its standout features is the Multi-Cyclonic Filtration System, which separates dirt and debris from the air, ensuring powerful suction that lasts. This technology effectively reduces clogging, helping maintain peak performance even during extensive cleaning tasks.

The Turbo POWER is equipped with a lightweight design, making it easy to maneuver around the home. Weighing in at only 15 pounds, users can lift and transport it without difficulty, getting into those hard-to-reach areas such as stairs and corners. Additionally, the vacuum comes with a large capacity dirt cup, allowing for extended cleaning sessions without frequent interruptions for emptying. This feature proves especially beneficial for larger homes or for those who tackle extensive cleaning projects.

Another notable characteristic of the Hoover Turbo POWER is its advanced brush roll system. The vacuum includes a combination of bristle and rubber wipers that work together to effectively remove embedded dirt from carpets while being gentle enough for hard floor surfaces. This dual-mode functionality allows users to switch between cleaning modes, adapting to the specific needs of their flooring.

Moreover, the vacuum boasts a variety of onboard tools, including a crevice tool, dusting brush, and upholstery nozzle. These attachments provide versatility, enabling users to clean upholstery, tight spaces, and delicate surfaces with ease. Furthermore, the Turbo POWER features a washable HEPA filter that traps 99.97% of dust and allergens, making it an ideal choice for households with allergies or asthma.

With a generous power cord length, users can effortlessly navigate large rooms without constantly changing outlets. The vacuum also features convenient cord storage, allowing for tidy storage when not in use. Finally, the Hoover Turbo POWER Upright Vacuum Cleaner is designed with user-friendly controls, ensuring that anyone can operate it with minimal effort.

In summary, the Hoover Turbo POWER Upright Vacuum Cleaner delivers impressive cleaning capabilities, making it an outstanding choice for any household seeking efficient and effective home cleaning solutions. Its combination of lightweight design, advanced cleaning technologies, and versatile attachments makes it a reliable tool for tackling a variety of cleaning challenges.

Hoover Turbo POWER Upright Vacuum Cleaner Filter assembly, Cleaning final filter, What to buy

Models: Turbo POWER Upright Vacuum Cleaner