3-13

Replacing bottom plate

Reposition bottom plate and 4 Phillips head screws. Tighten screws securely.

Brush roll replacement

3-14

When to replace

Disconnect cleaner from electrical outlet.

Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.

When brush roll brushes are worn, it should be replaced.

To check condition of brushes, move the edge of a card across bottom plate while turning brush roll. To maintain cleaning effectiveness, replace brush roll if brushes do not touch card.

What to buy

When purchasing a new brush roll, ask for HOOVER part No. 48414069.

3-15

D

Replacing brush roll

Removing brush roll

Slide Brush Roll Control (Fig. 2-9) to “Hard” (OFF) position.

Turn cleaner over and remove bottom plate (Fig. 3-9).

Lift up brush roll and slide V-belt (D) off brush roll.

3-16

E

C

Inspecting V-belt

The V-belt is designed to last for a long time and is not normally replaced. However, if V-belt is cracked, gouged or broken, now is a good time to replace it as follows.

Slide flat belt off large pulley as shown in Fig. 3-10.

To remove V-belt, slide back of belt over pulley (C). Then firmly pull on belt and “snap” it out.

Discard used belt. Replace with HOOVER part No. 38528034 (belt pack- age no. 40201200).

To install new belt (with lettering on out- side of belt), slide back of belt over pulley and pull front of belt toward groove (E) next to pulley.

Belt will “pop” into place.

3-17

F

Positioning belt on brush roll

Before positioning belt onto brush roll, check for debris accumulation as described in Fig. 4-2.

Insert brush roll through belt and posi- tion belt in groove (F) on brush roll.

3-18

G

H

 

Installing brush roll

Grasp brush roll and fit it into position by

first sliding end, opposite the belt, into the rectangular slot (G) on side of clean- er.

Push other side of brush roll (H) into place. Belt may fit loosely when proper- ly installed.

Reposition flat belt and bottom plate

(Figs. 3-12 and 3-13).

Continued

 

11

 

Page 10 Page 12
Page 11
Image 11
Hoover UH70600 manual Brush roll replacement, Replacing brush roll
Page 10 Page 12

UH70600 specifications

The Hoover UH70600 is a powerful upright vacuum cleaner that stands out in the crowded market of home cleaning appliances. Famous for its efficiency and user-friendly design, the UH70600 is tailored to deliver exceptional cleaning performance on various surfaces, making it an ideal choice for households with diverse flooring types.

One of the key features of the Hoover UH70600 is its WindTunnel technology. This innovative system creates strong suction by channeling airflow through multiple suction pathways, which efficiently lifts and removes dirt and debris from carpets and hard floors. This ensures that users can achieve a deep clean without having to go over the same area multiple times.

The UH70600 is equipped with a HEPA filtration system that captures 99.97% of dust and allergens as small as 0.3 microns. This is particularly beneficial for allergy sufferers or households with pets, as it helps to maintain cleaner air quality while trapping allergens within the vacuum. The washable filter further enhances convenience, allowing users to maintain optimal performance with minimal hassle.

In terms of versatility, the Hoover UH70600 features a range of attachments that enable users to clean different surfaces and hard-to-reach areas. The included tools, such as a crevice tool, dusting brush, and upholstery nozzle, allow for effective cleaning of furniture, staircases, and tight spaces. This versatility ensures that every nook and cranny can be effectively cleaned, making the UH70600 a thoroughly comprehensive cleaning solution.

Another useful characteristic of the UH70600 is its large dust bin capacity, which allows for longer cleaning sessions without the need for frequent emptying. The bin is also easy to detach and empty, making the vacuum maintenance a breeze. Additionally, it comes with a 12-foot extended reach hose, ensuring that even high places or areas behind large furniture are easily accessible.

The design of the Hoover UH70600 emphasizes user comfort and ease of use. It features a lightweight body for easy maneuverability, as well as a comfortable handle that reduces strain on the wrist during prolonged cleaning. The vacuum also includes a cord rewind system that quickly wraps up the 27-foot power cord, simplifying storage and making it ready for the next use.

Overall, the Hoover UH70600 combines cutting-edge technology with practical features to provide an efficient and user-friendly cleaning experience. Its powerful suction, advanced filtration, and versatile attachments make it a top choice for those looking to keep their homes immaculate. Whether dealing with pet hair, everyday dirt, or allergens, the Hoover UH70600 is designed to meet the challenges of modern cleaning demands.
Top Page Image Contents