![](/images/new-backgrounds/1298036/29803619x1.webp)
1 |
A |
STEP 1:
ATTACH FRONT TUBE.
Note: Make sure not to tighten bolts until all assembly steps have been completely assembled and aligned.
2 |
B |
STEP 2:
ATTACH LEFT & RIGHT GUIDE RAILS.
3 | U |
| |
J | C |
G | B |
|
STEP 3:
ATTACH CONSOLE MAST AND CONSOLE MAST BOOT.
Note: Make sure to loosen the water bottle screws in order to fit the console cable through the mast. DO NOT PINCH WIRES!
4 F |
K |
H |
STEP 4:
ATTACH LEFT & RIGHT PEDAL ARMS AND PEDAL ARM SLEEVES.
Note: Black ‘Teflon’ surface of K should be facing the pedal arm.
5 | E |
I |
|
STEP 5:
ATTACH LEFT & RIGHT LOWER HANDLE BARS TO CONSOLE MAST. ATTACH LEFT & RIGHT UPPER HANDLE BARS. ATTACH
6 | D |
|
L |
|
|
| Q | Q |
STEP 6:
ATTACH FOOT PAD TO FOOT PLATE THEN CONNECT THE PIVOTING FOOT PAD.
7 |
|
|
G | R |
|
|
| |
| S | T |
STEP 7:
ATTACH LEFT & RIGHT LINK ARMS TO LOWER LEFT & RIGHT HANDLE BARS.
8 |
STEP 8:
ATTACH CONSOLE AND CONNECT ALL WIRES. Note: DO NOT PINCH WIRES!
Note: Bolts are
10