Horizon Fitness CSE 3.5 10, 11, ASSEMBLY STEP 3, ASSEMBLY STEP 4

BEFORE

YOU BEGIN

10

INTRODUCTION IMPORTANT

PRECAUTIONS ASSEMBLY BEFORE

YOU BEGIN ELLIPTICAL

OPERATION LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE

YOU BEGIN ASSEMBLY

11

INTRODUCTION

IMPORTANT

PRECAUTIONS

ELLIPTICAL

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

��

ASSEMBLY STEP 3

A) Open HARDWARE BAG FOR STEP 3.

B) Attach the PERIMETER BARS using 4 BOLTS (E).

C) Attach REAR STABILIZER COVER using 2 SCREWS (F).

D) Attach FRONT STABILIZER COVERS using 2 SCREWS (F) for each side.

��

HARDWARE BAG FOR STEP 3 CONTENTS :

ASSEMBLY STEP 4

��

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A) Remove PRE-ATTACHED BOLTS & WASHERS from CONSOLE MAST.

B) Slide LOWER HANDLEBARS onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED BOLTS & WASHERS.

C) Attach UPPER HANDLEBARS to LOWER HANDLEBARS using PRE-ATTACHED SET SCREWS.

After handlebars are assembled they will rotate freely – be cautious. Until the

machine is fully assembled, do not grab the handlebars for support.

WARNING