Horizon Fitness CSE 3.5 14, 15, ASSEMBLY STEP 7 (CSE4.5 ONLY), ASSEMBLY STEP 8

BEFORE

YOU BEGIN

14

INTRODUCTION IMPORTANT

PRECAUTIONS ASSEMBLY BEFORE

YOU BEGIN ELLIPTICAL

OPERATION LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE

YOU BEGIN ASSEMBLY

15

INTRODUCTION

IMPORTANT

PRECAUTIONS

ELLIPTICAL

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

ASSEMBLY STEP 7 (CSE4.5 ONLY)

��

A) Open HARDWARE BAG FOR STEP 7.

B) Pull LOWER LINK ARM towards you to acess elbow joint to attach ELBOW COVERS. Once it is in it’s forward

most position, rest the LOWER LINK ARM on the GUIDE RAIL (as shown).

CAUTION: Be careful to keep the LOWER LINK ARM and LOWER HANDLEBAR aligned with guide rail. Do not

twist them to the left or right while pulling them towards you.

C) Attach INSIDE & OUTSIDE ELBOW COVERS to elbow joint using 2 SCREWS (L) and 1 SCREW (M) (as shown).

D) Repeat on other side.

ASSEMBLY STEP 8

��

A ) Open HARDWARE BAG FOR STEP 8.

B) Align LOWER LINK ARM with U BRACKET.

CAUTION: Be careful to keep the LOWER LINK ARM aligned with guide rail. Do not twist it to the left or right

while positioning it on the U BRACKET.

C) Insert 2 TEFLON WASHERS (E) on left and right sides of FOOT PLATE TUBE before sliding SPACER (F) through

U BRACKET and FOOTPLATE TUBE.

D) Insert FLAT WASHER (C) and BOLT (G) into outside end of FOOTPLATE TUBE to secure LOWER LINK ARM to

PEDAL ARM.

E) Repeat on other side.

��

HARDWARE BAG FOR STEP 8 CONTENTS :

��

HARDWARE BAG FOR STEP 7 CONTENTS : CSE4.5 ONLY

CSE4.5 ONLY

��