INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING LIMITED GUIDELINES & MAINTENANCE WARRANTY
CONSOLE
GRIP PULSE
WATER BOTTLE HOLDER CONSOLE MAST
TOP COVER
UPPER HANDLEBAR
HANDLE BAR COVER
MAIN FRAME
LOWER HANDLEBAR
PIVOTING FOOT PAD 
PEDAL ARM
WHEEL COVER
REAR STABILIZER COVER
LOWER LINK ARM
ELBOW COVER
FRONT STABILIZER COVER
TOOLS INCLUDED
c5mm Allen Wrench
c6mm Allen Wrench
cPhillips Screw Driver
c13/15mm Flat Wrench
PARTS INCLUDED
c | 1 | Console | c | 2 | Elbow Cover Sets |
c | 1 | Console Mast | c | 1 | Rear Stabilizer Cover |
c1 Front Stabilizer Tube c 2 Front Stabilizer Covers
c2 Upper Handlebars c 2 Handle Bar Cover Sets
c 2 Lower Handlebars | c 1 Water Bottle Holder |
c2 Lower Link / Pivoting Foot Pads
c2 Top Covers
c1 HORIZON FITNESS
c4 Hardware Bags
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
A S S E M B LY STEP 1
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) | SCREW (M) |
20 mm | 18 mm | 20 mm | Qty: 6 |
Qty: 2 | Qty: 2 | Qty: 2 |
|
| MAIN FRAME | |
| FRONT STABILIZER COVERS | |
| SCREW (M) | |
| SCREW (M) | |
REAR STABILIZER COVER | FRONT STABILIZER TUBE | |
REAR STABILIZER | BOLT (A) | |
SPRING WASHER (B) | ||
| ||
| FLAT WASHER (C) |
A)Open HARDWARE BAG FOR STEP 1.
B)Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT WASHERS (C).
C)Attach FRONT STABILIZER COVERS using 4 SCREWS (M).
D)Attach REAR STABILIZER COVER using 2 SCREWS (M).
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
LS_635E_User_Guide_Rev.1.2.indd | 3/29/07 1:07:27 PM |
