11
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
A Open HARDWARE BAG 3.
B Slide the HANDLEBAR ExTENSION
onto the CONSOLE HANDLEBAR.
C Insert BOLTS (E) into HANDLEBAR
ExTENSION and fully tighten.
D Align the lower part of the
HANDLEBAR ExTENSION with the
center of the CONSOLE MAST.
E Insert BOLTS (F) and ARC WASHER
(D) through bottom holes of
HANDLEBAR ExTENSION into CON-
SOLE MAST and fully tighten.
F Repeat on other side.
ASSEMBLY STEP 3-B (T72 model)HANDLEBAR
EXTENSION
& BOLT (F)
BOLT(E)
ARCWASHER (D)
CONSOLE MAST
CONSOLE
T72
BOLT (E)
10 mm
Qty: 2
BOLT (F)
115 mm
Qty: 2
angle view
ARC WASHER (D)
Qty: 2
HARDWARE BAG 3 CONTENTS : T72