II. INSTALLATION AND OPERATING INSTRUCTIONS
1. CHECKS BEFORE INSTALLATION
*Visually inspect the exterior of the shipping container, and any severe damage noted should be reported to the carrier.
WARNING
Remove shipping carton, evaporator spacer, tape(s) and packing. If packing material is left in the showcase, it will not work properly.
IMPORTANT
Remove shipping tape holding the door.
*Remove the package containing accessories.
*See the nameplate on the rear of the showcase, and check that your voltage supplied
2. LOCATION
WARNING
This showcase is not intended for outdoor use. Normal operating ambient temperature should be within 50°F (10°C) to 80°F (27°C). Operation of the showcase, for extended periods, outside of this normal temperature range may affect cooling performance.
For best operating results:
*The showcase should not be located next to ovens, grills or other high heat producing equipment.
No good | Good |
for the equipment where its entire bottom |
|
surface can be steadily positioned. Level |
|
the showcase from side to side and front to |
|
rear. Installation of the showcase only partly |
|
in contact with the foundation may result in | Fig. 2 |
deformation, damage or failure. |
2
