2)Position the showcase in a selected site. Clean the interior with soap and water and rinse thoroughly.
3)Level the showcase in both the
4)The perimeter where the machine touches the counter should be sealed with silicone.
4. ELECTRICAL CONNECTIONS
*This showcase must be plugged into the separated power receptacle which has enough capacity. The maximum allowable voltage variation should not exceed ± 10 percent of the nameplate rating. See the nameplate.
5. DRAIN CONNECTIONS
*The hose may be connected to either right or left joint, whichever is convenient.
*Keep more than 2 vertical inch (5 vertical cm) air gap between the drain pipe end and the sink.
Hose
Joint
Joint
Fig. 5
4
