2.Sanitizing Procedure - Following Cleaning Procedure
1)Dilute 1.25 fl. oz. (37 ml or 2.5 tbs) of a 5.25% sodium hypochlorite solution (chlorine bleach) with 2.5 gal. (9.5 l) of warm water.
2)Remove the front insulation panel.
3)Pour the sanitizing solution into the water tank.
4)Move the service switch to the "WASH" position.
5)Replace the front insulation panel and the front panel in their correct positions.
6)Turn on the power supply to start the sanitizing process.
7)Turn off the power supply after 15 minutes.
8)Remove the front panel.
9)Move the service switch to the "DRAIN" position.
10)Replace the front panel in its correct position, then turn on the power supply for 2 minutes.
11)Turn off the power supply.
12)Remove the front panel.
13)Repeat steps 18 through 31 in "1. Cleaning Procedure" two times to rinse thoroughly.
14)Move the control switch to the "ICE" position.
15)Replace the front panel in its correct position.
16)Clean the dispenser unit/storage bin liner using a neutral cleaner. Rinse thoroughly after cleaning.
17)Turn on the power supply to start the automatic icemaking process.
B. Maintenance
This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.
WARNING
1.Only qualified service technicians should attempt to service or maintain this icemaker.
2.Disconnect power before performing service or maintenance.
1.Stainless Steel Exterior
To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp cloth containing a neutral cleaner to wipe off oil or dirt buildup.
2.Dispenser Unit/Storage Bin and Scoop
•Wash your hands before removing ice. Use the plastic scoop provided (bin accessory).
•The dispenser unit/storage bin is for ice use only. Do not store anything else in the dispenser unit/storage bin.
•Clean the scoop and the dispenser unit/storage bin liner using a neutral cleaner. Rinse thoroughly after cleaning.
17
