About crisper removal. | www.Hotpoint.com |
Not all features are on all models.
Crisper Removal
Unload the bottom shelf before attempting to remove the storage drawers.
To Remove:
Lift the drawers up slightly while pulling them past the stop location.
If the door prevents you from taking out the drawers, first try to remove the door bins. If this does not offer enough clearance, the refrigerator will need to be rolled forward until the door opens enough to slide the drawers out. In some cases, when you roll the refrigerator out, you will need to move the refrigerator to the left or right as you roll it out.
To remove the glass cover:
Remove the glass, then the frame. When replacing the glass, push the front edge firmly into the frame.
Push up the glass cover at the rear.
Slide the glass cover backwards until the front edge comes out of the frame.
Removing the glass cover | Rotate the side of the glass cover up. |
|
Remove the glass cover.
To remove the frame:
Lift up the front of the frame using both hands.
Slide the frame forward.
Rotate the side of the frame up.
Remove the frame.
Removing the frame
About the additional features.
Not all features are on all models.
ShelfSaver™ Rack
This | To remove, slide the rack out to the stop |
or two wine/water bottles (lengthwise). | position, lift the rack up and past the stop, |
Can be removed for cleaning. | and lift out. |
9
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support
