Remove the Freezer Door, Remove the Refrigerator Door | Hotpoint 22

Installation Instructions

1REMOVE THE FREEZER DOOR

Tape the door shut with masking tape.

Remove the hinge cover on top of the freezer door (on some models).

Remove the two screws, then lift the hinge straight up to free the hinge pin from the socket in the top of the door.

Top Hinge

Tape the door shut with masking tape.

Remove the tape and tilt the door away from the cabinet. Lift it off the center hinge pin.

Set the door on a non-scratching surface with the inside up.

2REMOVE THE REFRIGERATOR DOOR

Tape the door shut with masking tape.

Remove the center hinge pin with a 3/4″ socket.

Hinge Pin

Remove the tape and tilt the door away from the cabinet. Lift the door straight off the bottom hinge bracket.

Set the door on a non-scratching surface, with the inside up.

CAUTION: Do not let door drop to the floor. To do so could damage the door stop.

3TRANSFER TOP HINGE TO THE LEFT

Interchange hinge and screws at top right with screws at the top left of cabinet.

Do not tighten screws on hinge side at this time.

17

Image 17

Hotpoint 22, 25 owner manual Remove the Freezer Door, Remove the Refrigerator Door, Transfer TOP Hinge to the Left

Contents

Write the model and serial numbers here Model # Serial # Refrigerators Refrigerants Off setting Instructions Troubleshooting Tips HOW to Connect Electricity Touch pad controls About the controls on the refrigeratorLocking the Controls on some models To lock the controls Rearranging the Shelves About the shelves and binsSpillproof Shelves on some models To remove Non-Adjustable Shelves on the Door Adjustable Bins on the DoorSlide-Out Spillproof Shelf on some models Freezer Tilt Out Bin on some models About the crispers and pans About the additional features About crisper removal Icemaker Accessory KitAbout the automatic icemaker Crisper Removal Care and cleaning of the refrigerator Refrigerator Compartment Replacing the light bulbsFreezer Compartment Light on some models Freezer Compartment Dome Light on some models Refrigerator Location Water Supply to the IcemakerClearances Rollers What YOU will Need Before YOU Begin Drill the Hole for the Valve Shut OFF the Main Water SupplyChoose the Valve Location Connect the Tubing to the Valve Fasten the Shutoff ValveTighten the Pipe Clamp Route the Tubing Turn the Water on AT the Shutoff Valve Connect the Tubing to the Refrigerator Start the Icemaker Plug in the RefrigeratorImportant Notes Tools YOU will Need Transfer TOP Hinge to the Left Remove the Freezer DoorRemove the Refrigerator Door Transfer Bottom Hinge Bracket to the Left Transfer Door Stops Long Handle Transfer Refrigerator Door Handle to the Right Rehang the Freezer Door Rehang the Refrigerator Door Hummm Normal operating sounds Instructions Operating Before you call for service… Ice cubes have See Care and cleaningOdor/taste No ice cube One Year What Is Not CoveredWe Will Replace Page Troubleshooting Tips Page Parts and Accessories Schedule ServiceConsumer Support Hotpoint Website Real Life Design Studio