Rehang the Refrigerator Door, Rehang the Freezer Door | Hotpoint 25

Installation Instructions

REVERSING THE DOOR SWING (CONT.)

8

TRANSFER FREEZER DOOR HANDLE TO THE RIGHT

Remove the screws holding the handle to the top and bottom of the door. Remove handle.

Move the plug button on the right side of the door to the handle screw hole on the left side.

Reattach the handle on the opposite side using the holes closest to the edge of the door.

9REHANG THE REFRIGERATOR DOOR

Lower the refrigerator door onto the bottom hinge pin.

Straighten the door and line it up with the center hinge bracket.

Reinstall the center hinge pin with a 3/4″ socket. Turn it until it extends through the hinge bracket and into the door.

Hinge Pin

Center Hinge

Bracket

10

REHANG THE FREEZER DOOR

Lower the freezer door onto the center hinge pin.

Center Hinge Pin

Lift the top hinge so the pin fits into the door socket.

Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the top hinge screws.

20

Image 20

Hotpoint 25, 22 owner manual Rehang the Refrigerator Door, Rehang the Freezer Door

Contents

Refrigerators Write the model and serial numbers here Model # Serial # Off setting Refrigerants HOW to Connect Electricity Instructions Troubleshooting Tips About the controls on the refrigerator Touch pad controlsLocking the Controls on some models To lock the controls About the shelves and bins Rearranging the ShelvesSpillproof Shelves on some models To remove Adjustable Bins on the Door Non-Adjustable Shelves on the DoorSlide-Out Spillproof Shelf on some models Freezer Tilt Out Bin on some models About the additional features About the crispers and pans Icemaker Accessory Kit About crisper removalAbout the automatic icemaker Crisper Removal Care and cleaning of the refrigerator Replacing the light bulbs Refrigerator CompartmentFreezer Compartment Light on some models Freezer Compartment Dome Light on some models Water Supply to the Icemaker Refrigerator LocationClearances Rollers Before YOU Begin What YOU will Need Drill the Hole for the Valve Shut OFF the Main Water SupplyChoose the Valve Location Fasten the Shutoff Valve Connect the Tubing to the ValveTighten the Pipe Clamp Route the Tubing Connect the Tubing to the Refrigerator Turn the Water on AT the Shutoff Valve Plug in the Refrigerator Start the IcemakerImportant Notes Tools YOU will Need Transfer TOP Hinge to the Left Remove the Freezer DoorRemove the Refrigerator Door Transfer Door Stops Transfer Bottom Hinge Bracket to the Left Transfer Refrigerator Door Handle to the Right Long Handle Rehang the Refrigerator Door Rehang the Freezer Door Normal operating sounds Hummm Before you call for service… Instructions Operating See Care and cleaning Ice cubes haveOdor/taste No ice cube One Year What Is Not CoveredWe Will Replace Page Troubleshooting Tips Page Schedule Service Parts and AccessoriesConsumer Support Hotpoint Website Real Life Design Studio