Connecting the water supplies

EN

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor / surface where the dishwasher rests (A).

before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

Untie the end of the GREY drainage hose from the rear of the appliance.

If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

*Only available in selected models.

4

Page 4
Image 4
Hotpoint 910 manual Connecting the water supplies, Sink Waste System, Connecting the water inlet hose

910 specifications

The Hotpoint 910 is a sophisticated cooking appliance that combines modern technology with user-friendly features to enhance the culinary experience in any kitchen. Designed with versatility in mind, this appliance offers a plethora of functions that cater to a variety of cooking styles and preferences.

One of the standout features of the Hotpoint 910 is its advanced cooking modes. It includes options such as conventional baking, grill, and programmable auto-cook functions. These modes allow users to easily prepare everything from simple roasts to intricate desserts, ensuring that meals are cooked to perfection every time. The built-in microwave function adds another layer of convenience, allowing for quick reheating and defrosting without needing to wait for a traditional oven to preheat.

Another distinctive characteristic of the Hotpoint 910 is its spacious capacity. With ample interior space, this appliance is designed to accommodate larger dishes, making it ideal for families or those who love entertaining guests. The adjustable racks provide flexibility in cooking larger items, ensuring that users can make the most of the available space.

The technology behind the Hotpoint 910 is impressive. It features a smart temperature control system that guarantees even and consistent heat throughout the cooking process. This means that dishes are cooked uniformly, reducing the chances of hot spots or uneven results. The digital control panel is intuitive and easy to navigate, allowing users to customize their cooking settings with precision.

Additionally, the Hotpoint 910 incorporates energy-efficient technologies that help reduce power consumption, making it an environmentally friendly choice. The appliance is designed to minimize energy waste while still delivering exceptional cooking performance.

Cleaning and maintenance of the Hotpoint 910 are made easier with its self-cleaning feature, which eliminates the need for harsh chemicals or laborious scrubbing. The interior is crafted from materials that are resistant to stains and odors, ensuring that it remains fresh and clean after each use.

In summary, the Hotpoint 910 brings a perfect blend of functionality, efficiency, and ease of use to the kitchen. Its diverse cooking modes, spacious capacity, advanced temperature control, and user-friendly design make it a valuable addition to any home. Whether you're a seasoned chef or a culinary novice, the Hotpoint 910 is equipped to elevate your cooking experience.