Hotpoint 910 manual Wash options, Delay Start, Half load, Multi-functional tablets Tabs

Models: 910

1 16
Download 16 pages 51.41 Kb
Page 9
Image 9
Wash options

Wash options

The OPTIONS may only be set, modified or reset after the wash cycle has been selected and before the Start/ Pause button has been pressed.

Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compat- ible with the selected was cycle (see Table of wash cycles), the corresponding LED flashes rapidly 3 times.

If an option is selected which is incompatible with another option or wash cycle selected previously, the incompat- ible option light will flash 3 times and switches off, while the most recently selected setting remains lit.

Delay Start To deselect an option which has been set by mis- take, press the corresponding button again.

Delay Start

The start of the wash cycle may be delayed for a period of time between 1 and 24 hours.

1.After selecting the desired wash cycle and any other options, press the DELAY START button: the corresponding indicator light will illuminate. Use the same button to select the time at which you wish the wash cycle to begin (after a period of 1 to 24 hours).

2.Confirm your selection using the Start/Pause button; the countdown will begin. The selected delay period indicator light is displayed and the Start/Pause button stops flashing (the light becomes fixed instead).

3.When the set time has elapsed, a long beep sounds, the DELAY START indicator light switches off and the wash cycle begins.

To deselect the DELAY START option, press the DELAY START button repeatedly until the text OFF appears.

Half load The Delay Start function cannot be set once the wash has been started.

Half load

If there are not many dishes to be washed, a half load

EN

 

cycle may be used in order to save water, electricity and

 

detergent. Select the wash cycle and press the HALF LOAD

 

button: the indicator light will illuminate.

 

Multi-functional tablets (Tabs) Remember to halve the amount of detergent.

Manual background It is better to use powder detergent in this case.

Manual background This option is incompatible with the following wash cycle: Rapide wash.

Multi-functional tablets (Tabs)

This option optimises washing and drying results.

When using multi-functional tablets, press the MULTI- FUNCTIONAL TABLETS button. The corresponding indicator light will illuminate. The “Multi-functional tablets” option results in the lengthening of the wash cycle.

Manual background The MULTI-FUNCTIONAL TABLETS option remains set for subsequent wash cycles if it is not deselected.

Manual background The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option.

Manual background This option is not recommended for use with wash cycles which do not specify the use of multi-functional tablets (see Table of options).

This option is incompatible with the following wash cycle: Soak.

Table of options

A

B

C

Delay

Half

Tabs

 

 

 

 

Start

Load

 

 

 

1.

Eco

Yes

Yes

Yes

2. Auto Normal

Yes

Yes

Yes

3.

Prewash

Yes

Yes

No

4.

Intensive

Yes

Yes

Yes

5.

Speed 25’

Yes

No

Yes

6.

Delicate

Yes

Yes

Yes

7.

Shortime

Yes

No

Yes

8.

Good Night

Yes

No

Yes

9

Page 9
Image 9
Hotpoint 910 manual Wash options, Delay Start, Half load, Multi-functional tablets Tabs