7
GB
Function Effect Comments Enabled with
progra mmes:
Supe r
Wash
Allows for an
impeccable
wash, visibly
whiter than a
standard
Class A wash.
This function is incompatible with the RAPID function. 1, 2, 3, 4,
5, 6, 7, 8
Easy iron This option
reduces t he
amount of
creasing on
fabrics,
making th em
easier to iron.
When this function is set, programmes 6, 7, 8, 11 and
Delicate r inse will end with the laund ry left to soak
(Anti-crease) and the Rinse cycle phase LED will
flash.
- to concl ude the cy cle, press the START/RESET
button;
- to r un the dr aining cycle alone, set the knob to the
relative symbol and press the START/RESET
button.
All
progra mmes
except for
1, 2, 9, 10
and
Draining.
Rapi d Cuts the
duration of
the wash
cycle by 30 %.
This function is incompatible with the SUPER WASH
function.
1, 2, 3, 4,
5, 6, 7, 8
Rinses
Ext ra
Rins e
Increases the
efficien cy of
the ri nse.
Recommended when the appl iance has a ful l load or
with large quantities of detergent.
1, 2, 3, 4, 5,
6, 7, 8, and
Rinse
cycles.
Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash ( ).

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the programme selected.
The maximum spin speeds for each programme are as follows:
Programmes Maximum spin speed
Cottone 800 rpm
Synthetics 800 rpm
Wool 600 rpm
Silk no
The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol .
The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for
each programme.
To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by
continuously rotating the drum at a speed which is slightly faster than the normal washing speed. When, despite
repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set frequency.
If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.
The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.

Functions

To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.