Description of the washer dryer

 

Control panel

CONTROL PANEL

GB

LOCK button

 

ON/OFF

DRYING

SPIN SPEED

button

 

Button

Button

 

DISPLAY

 

 

 

 

 

MEMORY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WASH

 

Button

 

 

 

 

 

 

 

 

 

 

CYCLE

 

 

FUNCTION

START/PAUSE

 

 

SELECTOR

 

 

Detergent dispenser drawer

 

DELAY

buttons

button with indicator

Buttons

 

 

 

light

 

 

 

 

TIMER

 

 

 

 

 

 

 

 

 

 

 

Button

TEMPERATURE

 

 

 

 

 

 

 

 

 

 

Button

 

Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”).

ON/OFF button : press this briefly to switch the ma- chine on or off. The START/PAUSE indicator light, which flashes slowly in a green colour shows that the machine is switched on. To switch off the washer dryer during the wash cycle, press and hold the button for approximately 2 seconds; if the button is pressed briefly or accidentally the machine will not switch off. If the machine is switched off during a wash cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR buttons: used to set the desired wash cycle (see “Table of wash cycles”).

MEMORY button: press and hold the button to store a cycle with your own set of preferences in the memory of the machine. To recall a previously stored cycle, press the MEMO button.

FUNCTION buttons: press the button to select the desired function. The corresponding indicator light on the display will switch on.

SPIN button : press to reduce or completely exclude the spin cycle - the value is indicated on the display.

TEMPERATURE button : press to decrease the tem-

perature: the value will be shown on the display.

CONTROL PANEL LOCK button : to activate the control panel lock, press and hold the button for approximately 2

seconds. When the symbol is illuminated, the control panel is locked (apart from the ON/OFF key). This means it is possible to prevent wash cycles from being modified accidentally, especially where there are children in the home. To deactivate the control panel lock, press and hold the button for approximately 2 seconds.

DELAY TIMER button : press to set a delayed start time for the selected wash cycle. The delay time will be shown on the display.

DRYING button : press to set a drying cycle.

START/PAUSE button with indicator light: when the gre- en indicator light flashes slowly, press the button to start a wash cycle. Once the cycle has begun the indicator light will remain lit in a fixed manner. To pause the wash cycle, press the button again; the indicator light will flash in an orange colour. If the symbol is not illuminated, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the button again.

Standby mode

This washing machine, in compliance with new energy sa- ving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again.

Consumption in off-mode: 0,5 W

Consumption in Left-on: 0,5 W

10

Page 10
Image 10
Hotpoint BHWDD 74, Hotpoint washer dryer instruction manual Description of the washer dryer, Control panel