Desktop Charger Status
The charger displays the battery’s charge status. The indicator will show one of the following:
solid red
Desktop Charger Troubleshooting
If the battery is not charging and there is:
A flashing yellow indicator—
•If a battery is in the rear pocket, the rear pocket’s LED continues to flash yellow (indicating that the charger’s pocket is in a “Wait State”) until the battery in the front pocket is more than 90% charged (front pocket’s LED is solid green). This is normal operation.
•To protect your battery’s life expectancy, the charger does not rapid charge a battery when its temperature is below 5oC (41oF) or above 45oC (113oF).
No LED indication—
•Check that the i700plus phone with battery, or a battery alone, is inserted correctly.
•Make sure that the power supply is plugged into an appropriate AC outlet and that the connector is properly seated.
•Rear pocket only: Remove the battery from the charger. Use an ordinary pencil eraser to clean the three metal contacts on the battery and then place the battery in the charger.
•If the LED indicator remains turned OFF, the battery may be defective and should be replaced.
A flashing red indicator—
•Remove the battery from the charger. Use an ordinary pencil eraser to clean the metal contacts on the battery and then place the battery into the charger.
•If the LED indicator continues to flash red, the battery may be defective and should be replaced.
•If both LEDs flash red, this indicates that the incorrect power supply is plugged in.
www.nextel.com
