How to run a wash cycle or a drying cycle

1. SWITCH THE MACHINE ON. Press the button; the text

GB WELCOME will appear on the display and the START/PAUSE

indicator light will flash slowly in a green colour.

2.LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure you do not exceed the maximum load value indicated in the table of programmes on the following page.

3.MEASURE OUT THE DETERGENT. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “Detergents and laundry”.

4.CLOSE THE DOOR.

5.SELECT THE WASH CYCLE. Press one of the WASH CYCLE SELECTOR buttons to select the required wash cycle; the name of the wash cycle will appear on the display. A temperature and spin speed is set for each wash cycle; these may be adjusted. The duration of the cycle will appear on the display.

6.CUSTOMISE THE WASH CYCLE. Use the relevant buttons:

Modifying the temperature and/or spin speed. The machine automatically selects the maximum temperature and spin speed set for the selected wash cycle; these values cannot therefore be increased. The temperature can be

decreased by pressing the button, until the cold wash “OFF” setting is reached. The spin speed may be progressively

reduced by pressing the button, until it is completely excluded (the “OFF” setting). If these buttons are pressed again, the maximum values are restored.

!Exception: if the (60°) programme is selected, the temperature can be increased up to a value of 90°C.

Setting a delayed start.

To set a delayed start for the selected programme, press the corresponding button repeatedly until the required delay period has been reached. When this option is enabled, the symbol lights up on the display. To remove the delayed start function press the button until the text “OFF” appears on the display.

Setting the drying cycle.

The desired drying cycle type may be set by pressing the DRYING button once or several times. Two options are available:

A - Based on the how damp the clothes are once they have been dried:

Iron dry: slightly damp clothes, easy to iron.

Hanger dry: dry clothes to put away.

Cupboard dry: very dry clothes, recommended for towelling and bathrobes.

B - Based on time: from 40 minutes to 180.

To exclude the drying phase press the relevant button until the text OFF appears on the display.

If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point, follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remainder of the load.

N.B: a cooling-down period is always added to the end of each drying cycle.

Drying only

Use the cycle selector knob to select a drying cycle ( ) in accordance with the type of fabric. The desired drying level or time may also be set using the DRYING button . Selecting the cotton drying cycle through the programme selector knob and pressing the “Eco” button activates an automatic drying cycle that allows for saving energy, thanks to an optimal combination of air temperature and cycle duration;

the display will visualise the “Eco” dryness level.

Table of Drying times (guideline values)

Fabric

 

Max.

Cupboard

Henger

Iron

Load type

load

dry

dry

type

dry

 

(kg)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clothing of

 

 

 

 

Cotton

different sizes,

5

180

170

160

 

Terry towels

 

 

 

 

 

 

 

 

 

 

Syn-

Sheets, Shirts,

 

 

 

 

Pyjamas,

3

180

170

160

thetics

socks, etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wool

Knitwear, Pul-

1,5

150

140

130

lovers, etc.

 

 

 

 

 

 

 

 

 

 

 

Modifying the cycle settings.

Press the button to enable the function; the indicator light corresponding to the button will switch on.

Press the button again to disable the function; the indicator light will switch off.

!If the selected function is not compatible with the programmed wash cycle, the indicator light will flash and the function will not be activated.

!If the selected function is not compatible with another function which has been selected previously, the indicator light corresponding to the first function selected will flash and only the second function will be activated; the indicator light corresponding to the enabled function will remain lit.

!The functions may affect the recommended load value and/ or the duration of the cycle.

7.START THE PROGRAMME. Press the START/PAUSE button. The corresponding indicator light will become green, remaining lit in a fixed manner, and the door will be locked (the DOOR LOCKED symbol will be on). During the wash cycle, the name of the phase in progress will appear on the display. To change a wash cycle while it is in progress, pause the washer dryer using the START/PAUSE button (the START/PAUSE indicator light will flash slowly in an orange colour); then select the desired cycle and press the START/PAUSE button again. To open the door while a cycle is in progress, press the START/PAUSE button; if the DOOR LOCKED symbol is switched off the door may be opened. Press the START/PAUSE button again to restart the wash cycle from the point at which it was interrupted.

8.THE END OF THE WASH CYCLE. This will be indicated by the text “END OF CYCLE” on the display; when the DOOR

LOCKED symbol switches off the door may be opened. Open the door, unload the laundry and switch off the machine.

!If you wish to cancel a cycle which has already begun, press

and hold the button. The cycle will be stopped and the machine will switch off.

12

Page 12
Image 12
Hotpoint BHWDD 74, Hotpoint washer dryer instruction manual How to run a wash cycle or a drying cycle, Close the Door