Installing Your Integrated Appliance
Please read through this section before starting any work.
The installation location should be in a dry, well ventilated room. The appliance should not be exposed to direct sunlight and should not be near a heat source (e.g. a radiator, cooker). If required, use an insulating plate.
Warning!
The appliance contains the environmentally friendly but flammable refrigerant R600a. Ensure that the refrigerant circuit is NOT damaged during transportation and installation.
Leaking refrigerant may ignite or cause eye injuries.
The more refrigerant in an appliance, the larger the room must be in which the appliance is situated. If a leak occurs in a room which is to small, a flammable
The room must be at least 1 m3 per 8g of refrigerant. The amount of refrigerant in your appliance is indicated on the rating plate located inside the appliance, on the bottom left hand side.
If refrigerant is leaking out:
●Avoid naked flames and ignition sources near the installation location.
●Unplug the appliance and thoroughly ventilate the room for several minutes.
Installation of the appliance under the worktop
Although you will need to provide all tools required for the installation, all fittings are supplied with the appliance.
4
