Hotpoint BS53X1 operating instructions The electronic cooking programmer

The electronic cooking programmer

GB

END OF		DISPLAY
	•• ••
DURATION
COOKING icon
icon

DECREASE TIME

button

SET TIME

button

CLOCK icon

TIMER icon

INCREASE TIME

button

Programming cooking

￿A cooking mode must be selected before programming can take place.

Programming the cooking duration

1. Press the	button several times until the
icon and the three digits on the DISPLAY begin to
flash.
2. Use the “+” and “-” buttons to set the desired
duration; if you press and hold either button, the
display will scroll through the values more quickly,
making it quicker and easier to set the value.

Setting the clock

￿The clock may be set when the oven is switched off or when it is switched on, provided that a the end time of a cooking cycle has not been programmed previously.

After the appliance has been connected to the

mains, or after a blackout, the icon and the four numerical digits on the DISPLAY will begin to flash.

1.Press thebutton several times until the icon and the four digits on the display begin to flash.

2.Use the “+” and “-” buttons to adjust the time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value.

3.Wait for 10 seconds or press thebutton again to finalise the setting.

Setting the timer

￿This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.

1.Press thebutton several times until the icon and the three digits on the display begin to flash.

2.Use the “+” and “-” buttons to set the desired time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value.

3.Wait for 10 seconds or press thebutton again to finalise the setting.

The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated.

3.	Wait for 10 seconds or press the	button again
to finalise the setting.
4.	When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer sounds.
•	For example: it is 9:00 a.m. and a time of 1 hour
	and 15 minutes is programmed. The programme
	will stop automatically at 10:15 a.m.

Setting the end time for a cooking mode

￿A cooking duration must be set before the cooking end time can be scheduled.

1.Follow steps 1 to 3 to set the duration as detailed above.

2. Next, press thebutton until the icon and the four digits on the DISPLAY begin to flash.

3.use the “+” and “-” buttons to adjust the cooking end time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value.

4.Wait for 10 seconds or press thebutton again to finalise the setting.

5.When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds.

Programming has been set when the and buttons are illuminated. The DISPLAY shows the cooking end time and the cooking duration alternately.

Cancelling a programme

To cancel a programme:

•press thebutton until the icon corresponding to the setting you wish to cancel and the digits on the display are no longer flashing. Press the “-” button until the digits 00:00 appear on the display.

•Press and hold the “+” and “-” buttons; this will cancel all the settings selected previously, including timer settings.

6