Installation

WARNING – THIS APPLIANCE MUST BE EARTHED.

Mains Connection

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the front of the plinth.

The cooker must be connected by a competent person such as one who is a, NICEIC registered contractor to a suitable double-pole control unit with a minimum rating of 32A and a minimum contact clearance of 3mm (applicable to newer properties, older properties where a 30A double pole control unit and a minimum contact clearance of 3mm is acceptable).

The double pole control unit should be fitted adjacent to the cooker, in accordance with IEE regulations. The control unit must be within 2 metres of but not directly above the appliance and should be easily accessible in the event of an emergency.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2, minimum. Access to the mains terminals is gained by removing the rear access cover. The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

Levelling

Two rear wheels and two front feet are fitted which can be adjusted up or down to set the height (900mm - 915mm) and level the cooker.

1.The rear wheels can be raised or lowered from the BACK of the cooker by adjusting the levelling screws ‘A’ in the plinth.

2.The front feet can be simply screwed in or out to lower or raise the front of the cooker. CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully. NOTE: Ensure oven shelves are level by using a spirit level on the rod shelves.

VIEWED FROM REAR

Siting the Cooker

The cooker is designed to fit between kitchen cabinets spaced 600mm apart.The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in an angled corner setting. It can also be used freestanding. Adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer than 650mm.

Note: This appliance must NOT be fitted on a platform.

Moving the Cooker

Before moving your cooker, switch off at the cooker control unit, ensure that it is cool.

Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements.

Radio Interference

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

Note: Take care in moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged.

3

Page 3 Page 5
Page 4
Image 4
Hotpoint C363E, C362E, C361E, C366E, C262E manual Installation, Viewed from Rear
Page 3 Page 5

C363E, C262E, C366E, C361E, C362E specifications

The Hotpoint C362E, C361E, C366E, C262E, and C363E models represent a versatile and efficient series of cookers designed to meet the needs of modern households. Featuring a blend of advanced technologies and user-friendly designs, these cookers promise to elevate your culinary experience while maintaining efficiency and safety.

One of the key features across these models is the multi-function oven. With various cooking modes, including fan-assisted convection, grill, and conventional heating, users can tailor their cooking methods to suit a wide range of recipes. The even heat distribution helps ensure that food is cooked perfectly every time, whether you’re roasting a chicken or baking pastries.

In terms of design, these models showcase a sleek and contemporary appearance, available in multiple finishes to suit different kitchen aesthetics. The clean lines and minimalist control panel contribute to an easy-to-navigate interface, allowing users to select settings effortlessly.

Safety is paramount in the Hotpoint C-series, and features such as the thermostatic temperature control and flame failure safety device are integral parts of these cookers. The flame failure device automatically cuts off the gas supply if the flame goes out, providing peace of mind for families. Additionally, the child safety lock ensures that little hands cannot accidentally operate the oven.

The Hotpoint models also incorporate self-cleaning technology, reducing the burden of maintenance. The pyrolytic cleaning function heats the oven to high temperatures, turning food residues into ash that can be easily wiped away. This not only saves time but also ensures that the oven remains hygienic and in excellent condition.

Moreover, energy efficiency is a vital characteristic of the C-series cookers. With high-grade insulation and advanced heating elements, these models are designed to use less energy without compromising on performance, making them an environmentally friendly choice for conscientious consumers.

With their combination of exceptional cooking capabilities, safety features, and energy efficiency, the Hotpoint C362E, C361E, C366E, C262E, and C363E cookers stand out as reliable and stylish options for anyone looking to enhance their kitchen experience. Each model caters to a range of culinary needs while ensuring that cooking is enjoyable and efficient. Whether you are a novice cook or an experienced chef, these cookers are designed to inspire creativity in the kitchen.
Top Page Image Contents