| Switching on the cooking zones | ||
GB | |||
Each cooking zone is controlled using a selector button | |||
| |||
| and a power adjustment device consisting of a | ||
| |||
| |||
| • To begin operating a cooking zone, press the | ||
| corresponding control button and set the desired | ||
| power level (between 0 and 9) using the buttons | ||
| or (+) |
| |
| Press and hold the | ||
| immediately at “9” | ||
| Press and hold (+) and | ||
| return to power level “0” | ||
| If the power level is “0” press and hold the (+) button | ||
| to increase the power level quickly | ||
| The choice of a cooking zone is signalled by a beep | ||
| sound, and then the power level is shown on the | ||
| display |
| |
| If the selection of a heater is not done in 10 seconds, | ||
| the cooktop will be turned off automatically. | ||
| Fast Boil- “Booster” function | ||
| The booster function for some of the cooking zones may be | ||
| used to shorten | ||
| It may be activated by pressing the (+) button over level | ||
| 9. This function boosts the power to 1600 W or 2000 W, | ||
| depending on the size of the relevant cooking zone. | ||
| The activation of | of the booster is signalled by a beep | |
| sound, and the letter ‘P’ appearing on the display. | ||
| The booster works for max 10 minutes. After these 10 | ||
| minutes a beep sounds and the cooking zone will | ||
| return to level “9” |
| |
| With the heater at Booster level, if the [+] key is | ||
| Touched an error beep sounds and the cookset | ||
| doesn’t change. With the heater at Booster level, if the | ||
| |||
| reduced to 9. |
| |
| Switching off the cooking zones | ||
| To switch off a cooking zone, select it using the corresponding | ||
| selector button | and: | |
| • Press the | ||
progressively decrease until it is switched off.
Once the cooking zone is selected, the heater can also be switched off by touching the
sounds and the corresponding display shows “0”.
Using the Timer
!All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 min.
1.Select the cooking zone using the corresponding selector button.
2.Adjust the power level of the cooking zone.
3.When required power level is selected, touching again the corresponding heating zone selector button, a beep sounds and a ‘t’ letter with dot point appears on the heater display. The remaining time will be displayed in the opposite part of timed heater. If timed heating zone is, for example, in the down part, timed time will appear in up displays. 4. Set the cooking duration using the
The
If the time is not selected before 10 seconds, or if the selected time is 0 after 10 seconds the last touch over the
Starting Timer countdown.
The countdown starts when the timer visualization is finished touching any cooking zone key or automatically 10 seconds after the last touch over the [+] or
level and the dot point showing that the heater is timed.
!To change the time for a timed heater, repeat the process explained above.
!Pressing and holding the + and - keys increases the speed of time selection
End of Timer countdown.
When the remaining time has run out, the timed heater is switched off, the heater display shows a blinking ‘0’ and the timer alarm beeps for one minute
The alarm will be cancelled by pressing any key of the touch control.
Control panel lock
When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc.).
Press the 
button to lock the control panel:
must switch off this function. Press the 
button for a few moments, the icon will stop illuminating and the lock function will be removed.
All the keys on the cooking zone selection will be locked if :the cooktop is off,,
if the Control Panel Lock is activated or if an error on a cooktop occurs.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
6
