Hotpoint DWF40 How to use your Dishwasher, D Ishwasher, Indicatorlights, First of all, Cycle end

D ISHWASHER

How to use your Dishwasher

First of all.

-Turn on the water supply tap completely.

-Add the correct amount of detergent.

-Load the baskets correctly.

-Check that the spray arms rotate freely.

-Close the door securely.

-Press the ON-OFF button "A": you will hear a short beep and indi- cator light "B" comes on.

Yourapplianceisnowonandawait- inginstructions.

Select the wash cycle. Select the wash cycle by turning knob "D" clockwise until the indica- torisinlinewiththeletterofthewash cycle required.

Selectthewashcyclemostsuitable for the type of dishes to wash (see ‘Programme Chart’).

After a few seconds you will hear a short beep and indicator light “G” will come on, indicating the wash cycle has begun. It is not advisable to make any changes at this point.

Indicatorlights.

Yourdishwasherhasindicatorlights "G" which light up to indicate the washcyclephasethatisunderway.

Modifying a wash cycle in progress.

Ifyouhavechosenthewrongcycle

-You can modify the wash cycle in progress, if it has only just started. Turn the knob anti-clockwise and set it to Reset, after a few seconds youwillhearfourbeepsandindica- torlight"G"willgoouttoshowallthe settings will have been cancelled. You are now free to re-set the cor- rect wash cycle.

You've left out a dish? Interrupt the wash cycle by press- ing the On-Off button "A", then insert the dish you had forgotten. When you shut the door, press the On-Off button again. The cycle will startupfromwhereyouinterrupted it.

Cycle end

The end of the wash cycle is indi- cated by 2 short beeps and the flashing ofthedryingphaseindica- torlight.

Turn the appliance off by pressing the On-Off button “A”, thus switch- ing off the electricity supply.

Turn off the water tap.

Wait a few minutes before unload- ing the dishes: they are very hot! If youwaitalittlewhile,theydrybetter due to the steam.

Empty the lower basket first.

There's been a power failure or you opened the dishwasher door

The wash cycle stops and then restarts when the electricity comes backonorwhenyouclosethedoor.

For your own safety, ensure the door is closed, when the dishwasher is not in use.

8