Hotpoint DWF40 manual Programme Chart, D Ishwasher

Programme Chart

Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:

D ISHWASHER

Select the right wash cycle foryourdishes.Selecting themostsuitablewashcycle for the load ensures clean dishesandamore economicaluseofwaterand electricity.

CYCLE	CYCLE SELECTION	CYCLE	DETERGENT FOR	RINSE AID	WASH CYCLE DURARTION
	INSTRUCTIONS	DESCRIPTION	PRE-WASH & WASH		(without extra drying)
					in minutes
A	Very dirty dishes and pans	Pre-wash with hot water at 40 C
	(NOT to be used for delicate	Extended wash at 65 C
INTENSIVE	items)	2 cold rinses	5 + 25g	*	120
WASH		Hot rinse at 65 C
		Drying
B	Cycle for normally dirty pans and	Pre-wash with cold water
	dishes.	Short wash at 55 C - cold rinse	5 + 25g	*	72
NORMAL	Standard daily cycle.	Hot rinse at 70 C
WASH		Drying
C	Environmentally friendly cycle,	2 cold pre-washes
	with low energy consumption	Extended wash at 45 C	5 + 25g	*	130
ECO WASH	levels, suitable for normally dirty	Hot rinse at 65 C
	pans and dishes.	Drying
D	Economic and fast cycle to be	Short wash at 40 C
	used for slightly dirty dishes.	Cold rinse
FAST	Run cycle immediately after use.		25g		26
WASH	No drying.
E	Preliminary wash cycle for dishes	Short cold wash to prevent food
	while awaiting completion of the	from drying onto the dishes.			12
PREWASH	load with the dishes from the
	next meal.

To optimise wash performance and save on energy, try to use the dishwasher with a full wash load. If it takes some time to fill your dishwasher, use the pre-wash to avoid caked on food and build up of bad odours.

9