Sink Waste System
For under sink drainage:
•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage
•remove any restrictions from the waste spigot and ensure that the sealing bung is removed
•the hose should be routed, such that it is raised to a minimum height of 800mm (31/2”).
Ensure the sink outlet pipe has a minimum diamtere of 32mm.
•Untie the end of the GREY drainage hose from the rear of the appliance.
•Reposition the ‘Hooked End Support’ as required along the GREY drainage hose.
•If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.
Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.
EN
To ensure floods do not occur, the dishwasher:
-is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.
Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees
WARNING: HAZARDOUS VOLTAGE!
Under no circumstance should the water inlet hose be cut as it contains live electrical parts.
The Company shall not be held responsible for any incidents that occur if these regulations are not observed.
*Only available in selected models.
5
