GB

 

 

The Company shall not be held responsible for any

 

 

incidents that occur if these regulations are not observed.

 

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.

Technical data

Dimensions

width 60 cm

height 85 cm

 

 

 

depth 60 cm

Capacity

14 standard place-settings

Water supply

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

pressure

7,25 – 145 psi

Power supply voltage

See appliance data plate

 

 

 

 

Total absorbed power

See appliance data plate

 

 

 

 

Fuse

See appliance data plate

 

 

 

This dishwasher conforms to the

 

 

 

following European Community

 

 

 

Directives:

 

 

 

-2006/95/EC (Low Voltage)

 

 

 

-2004/108/EC (Electromagnetic

 

 

 

Compatibility)

 

 

 

-2009/125/EC (Comm. Reg.

 

 

 

1016/2010) (Ecodesign)

 

 

 

-97/17/EC (Labelling)

 

 

 

-2012/19/EU Waste Electrical

 

 

 

and Electronic Equipment

 

 

 

(WEEE)

 

 

 

Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor/surface where the dishwasher rests (A).

before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

Untie the end of the GREY drainage hose from the rear of the appliance.

If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

*Only available in selected models.

6

Page 6
Image 6
Hotpoint FDFET 33121 manual Connecting the water supplies, Sink Waste System, Anti-condensation strip

FDFET 33121 specifications

The Hotpoint FDFET 33121 is an innovative dishwasher designed to combine convenience, efficiency, and performance. This appliance stands out in the market due to its user-friendly features and advanced technologies that cater to the modern household. With a sleek and modern design, it seamlessly fits into any kitchen decor while providing optimal dishwashing capabilities.

One of the standout features of the FDFET 33121 is its large capacity, which allows users to wash up to 14 place settings in a single cycle. This spacious interior is ideal for families or those who frequently entertain guests, minimizing the need for multiple loads and saving valuable time. The adjustable racks and foldable tines create flexibility for accommodating various types of dishware, from large pots to delicate glassware.

The FDFET 33121 is equipped with Hotpoint's innovative ActiveDry technology, which ensures that dishes come out not only clean but also dry. This technology utilizes a unique drying process that enhances air circulation, resulting in a more efficient drying performance without the need for added heat, making it more energy-efficient.

In terms of energy consumption, the FDFET 33121 boasts an excellent energy rating, making it an environmentally friendly choice for households. The Eco Wash program is designed to reduce water and electricity consumption, allowing users to be more conscious of their environmental impact while enjoying the convenience of a dishwasher.

Furthermore, the dishwasher features a range of wash programs tailored to different types of loads. From intensive cycles specifically for heavily soiled pots and pans to delicate cycles for fragile items, users can choose the optimal setting for their needs. The Quick Wash option is particularly appealing for those who are short on time, providing a fast and efficient wash in just 30 minutes.

Noise levels are also a consideration with the FDFET 33121, as it operates at a low decibel level, ensuring a quiet experience even during nighttime operation.

Lastly, the user interface is straightforward, with easy-to-read controls that allow for quick selection of programs and options. The digital display offers clear feedback on the cycle status, further enhancing the user experience.

In conclusion, the Hotpoint FDFET 33121 is a versatile, efficient, and feature-rich dishwasher that meets the needs of contemporary households, blending performance and style seamlessly.