tion and general product advice can be found on our website, visit: www.theservicecentre.co.uk/help

MY MACHINE DOES NOT

PUMP OUT WATER

MY MACHINE IS LEAKING

THE DISPENSER WILL NOT

CLOSE PROPERLY

Indicator Lights:

The ‘DOOR LOCKED’ indicator light:

Has the drain hose been installed

correctly? Ensure it is not blocked

or kinked.

 

 

Are the drainage unit, standpipe

or under sink connections free

 

from blockages?

 

 

Has ‘Rinse Hold’ been selected?

The light will flash until the button

 

is pressed again.

 

 

Press the ‘Rinse Hold’ button

 

again.

 

See STEP 2: Installation

 

Clear any blockages that have

 

been found

 

Is the machine connected to

 

a sink waste system?

 

 

Check the blocked end of the

 

under sink drainage unit has

 

been cut off.

 

WATER COLLECTS IN THE

 

FABRIC DISPENSER

 

COMPARTMENT

 

Clean fabric dispenser drawer.

 

See STEP 3:‘The Dispenser

 

Drawer’.

 

Is the fill hose on correctly? If not tighten it.

Does the washer need

replacing?

Is your water pressure too

high?

Turn the main supply tap

down.

Is the standpipe or household

drain blocked.

You may need to call in a

plumber.

Is steam coming

from the dispenser

drawer?

The machine is designed to

release steam from the dispenser

drawer during hot washes.

Check the feet have been

levelled.

THE PROGRAMME TAKES A

LONG TIME

Check for low temperature and low pressure of the cold water supply.

Is the drawer clogged with

detergent?

 

 

Clean the dispenser drawer, see

STEP 3:‘The Dispenser Drawer

Check the drawer is properly

aligned.

SUDS ARE COMING FROM

THE DISPENSER DRAWER

Check the correct amount of

suitable detergent has been used,

refer to manufacturer’s

recommendations.

If you have used the wrong type of

detergent, select a Rinse programme to flush out your machine.

NOT ALL OF THE DETERGENT

HAS BEEN FLUSHED AWAY

Check that your cold water supply tap is turned on fully.

Check the inlet hose is not

kinked.

If the ‘DOOR LOCKED’ indicator light is flashing: Shut the door firmly, until it clicks.

The ‘DOOR LOCKED’ indicator light should now stay on.

If the door will not open... Check the programme has finished, is the ‘PROG.END’ indicator light lit? It takes about two minutes for the ‘DOOR LOCKED’ indicator light to go out after a programme has finished.

The door will not open until the ‘DOOR LOCKED’ indicator light has gone out.

The ‘ACTIVE’ and ‘PROG.END’ indicator

lights are both flashing...

This means that the machine cannot fill.

Check that the water supply is turned on and that the inlet hose is not kinked.

The ‘ACTIVE’ indicator light is flashing...

If the ‘ACTIVE’ indicator light is flashing:

This means that the programme selector dial has been moved since the programme started.

Return the dial to the original selection.

If your machine is still not working

contact:

Repair Service and Information Desk

UK 08709 066 066

Republic of Ireland 1850302 200

You will be asked for the following details: Name and Address, Post Code,Telephone Number, Date of Purchase, Colour and Model/Serial Numbers - which can be found on the inside of the door.

Clear and precise details of the query

or fault.

Remember, you will be charged for a service call if a problem with your machine is caused by incorrect installation or misuse.

ct installation, non-removal of transit bolts or packaging, leaks from household pipework, loose or blocked fill and drain hoses.

ne washable and NOT emptying contents from pockets may cause pump or drain blockages, or may damage components within the machine.

Page 11
Image 11
Hotpoint FEW12, FEW14, FEW10 manual Indicator Lights

FEW14, FEW10, FEW12 specifications

Hotpoint has consistently been a trusted name in home appliances, and their line of freestanding electric cookers, including models FEW12, FEW10, and FEW14, exemplifies their commitment to quality, convenience, and innovation. These cookers are designed to cater to a variety of cooking needs, making them ideal for both novice and experienced chefs.

One of the standout features of these models is their spacious ovens. The FEW12, FEW10, and FEW14 all come with ample cooking capacity, accommodating multiple dishes simultaneously. This is particularly useful for families or individuals who love hosting gatherings. The oven's design allows for even heat distribution, ensuring thorough cooking and baking every time.

Hotpoint has incorporated several advanced technologies in these models. The Fan Oven feature ensures a consistent temperature throughout the cooking process, minimizing hot spots and allowing for better baking results. The models are also equipped with a Grill function, providing the versatility to prepare a variety of dishes, from crispy meats to melted cheeses.

Another significant characteristic of the Hotpoint FEW series is the inclusion of a built-in timer and programmable settings. This feature allows users to set cooking times and temperatures, enabling them to multitask effectively without the worry of overcooking or burning their meals. Furthermore, the easy-to-read digital display enhances usability, making it simple for anyone to operate.

Cleaning is often a concern with electric cookers, but Hotpoint has addressed this with their innovative Easy Clean enamel interior. This special coating prevents grease and grime from sticking, making post-meal clean-up a breeze. Additionally, some models feature an Eco mode, which helps save energy without sacrificing performance.

In terms of design, the FEW12, FEW10, and FEW14 boast a modern aesthetic with sleek finishes, blending seamlessly with any kitchen décor. The control knobs and handles are ergonomically designed, providing ease of use and a premium feel.

Ultimately, the Hotpoint FEW series cookers bring together functionality, technology, and style, meeting the demands of diverse cooking environments while enhancing the overall culinary experience. Whether you’re roasting, baking, or grilling, these cookers deliver reliable performance, making them a valuable addition to any kitchen.