Using the freezer to its full potential
•Do not
•Fresh food that needs to be frozen must not come into contact with food that has already been defrosted. Fresh food must be stored above the grill in the freezer compartment and if possible be in direct contact with the walls (side and rear), where the temperature drops below
•Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break.
•The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4)
•! In order to obtain a greater amount of space in
the freezer compartment, you may remove the bins (except the lowest bin and the special COOL CARE ZONE bin, which has an adjustable temperature) and place the food directly onto the racks/glass shelvessupplied [where present].
!To avoid blocking the air circulation inside the freezer compartment, it is advisable not to obstruct the ventilation holes with food or containers.
!Do not open the door during freezing.
!If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9
!If the room temperature drops below 14°C for an extended period of time, the ideal temperature will not be reached in the freezer compartment and food preservation will be reduced.
FAST FREEZE and LOW AMBIENT switch
The appliance is fitted with a manual “Fast Freezer and Low Ambiant” switch.
When loading fresh food to freeze switch “Fast Freeze and Low Anbiant” on.
To set “Fast Freeze and Low Ambient” ON, press the
switch to “ | “ |
This switch activates intensive cooling to ensure that required temperatures are reached quickly.
So when the fresh food is frozen return the switch to its
OFF position, “ | “. |
Note: for Energy Saving ensure that “Fast Freeze and Low Ambient” is switched off after 24 hours.
For the refrigerator to operate properly the “Fast Freeze and Low Ambient” button must be ON when room temperature is 16°C or lower.
Ice tray | GB | |
The fact that they are situated on the top part of the | ||
| ||
freezer drawers ensures greater cleanliness: the ice no |
| |
longer comes into contact with the food placed inside |
| |
the freezer compartment; furthermore, the dripping of the |
| |
water during filling is avoided (a lid to cover up the hole |
| |
after filling with water is also provided). |
|
1.Pull out the tray by pushing it up.
Check that the tray is completely empty and fill it with water through the opening provided.
2.Take care not to exceed the level indicated (MAX WATER LEVEL). Excess water prevents the ice cubes from dispensing (if this happens, wait for the ice to melt and empty the tray).
3.Turn the tray 90°: due to the connected compartments each mould fills with water (see diagram).
4.Close the opening with the lid provided and put the tray back, placing the top part in the corresponding housing and allowing it to drop in again.
5.When the ice has formed (minimum time approximately
8 hours) knock the tray against a hard surface and wet the outside so that the ice cubes come loose and take them out through the opening.
MAX
WATER LEVEL
WATER | MAX |
LEVEL |
|
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
7
