Hotpoint GW32 Care and Cleaning, Cooker Finish, Cleaning Method, Vitreous Enamel, Paint, Plastic

Models: GW32 GWL32

1 24
Download 24 pages 56.86 Kb
Page 16
Image 16
COOKER FINISH

Care and Cleaning

COOKER FINISH

CLEANING METHOD

 

 

Vitreous Enamel

 

Hotplate, burner caps, grill

Cloth wrung out in warm soapy water. Stubborn

pan, oven base and rear,

stains can be removed with a cream paste,

inside of grill compartment,

liquid cleaner or by rubbing with fine steel wool

control panel.

soap pads.

 

Check that the cleaning agent is approved by the

 

Vitreous Enamel Development Council.

 

 

Paint

 

Plinth, Fascia bottom trim,

Wash with a cloth wrung out in warm soapy water

side panels, Lid trim, Rear

only.

end caps

DO NOT USE ABRASIVES.

 

 

Aluminium

 

Hotplate burner bodies

Similar to paint cleaning above. Use a nylon brush to

 

remove any cleaning materials, water or dirt from the

 

hotplate burners.

 

 

Chromium Plating

 

Oven shelves, grill pan grid,

Wipe with a cloth wrung out in warm soapy water.

grill pan handle support

A fine steel wool soap pad or a chrome or stainless

 

steel cleaner may be used.

 

 

Plastic

 

Grill pan handle, door

Wipe with a cloth wrung out in warm soapy water.

handles, control knobs

Stubborn stains can be removed with a cream

 

cleaner.

 

 

Glass

Wash with cloth wrung out in warm soapy water

Lid, Door

only. Do not use ABRASIVES. Polish with a dry cloth

 

 

or kitchen towel.

 

 

NOTE: To ensure rapid lighting of the hotplate burners every time they are used, the electrodes must be kept clean and dry. Remove any food spillage or cleaning materials from the electrode using a small nylon brush such as a tooth brush.

16

Page 16
Image 16
Hotpoint GW32 manual Care and Cleaning, Cooker Finish, Cleaning Method, Vitreous Enamel, Paint, Aluminium, Chromium Plating