Setting the quantity of ground coffee to be supplied
•Switch on the machine.
•Start the grinding by holding the button 
down until the desired quantity is obtained.
•This quantity will be memorised and remain the same for subsequent grindings.
To return to the original setting:
•Switch on the machine and switch it off by pressing the 
button for more than three seconds until the LED for the “grinding” button is illuminated.
•Switch the machine on again. The grinding quantity has now returned to the manufacturer’s original setting.
Setting the quantity of coffee
The flavour of the coffee depends on the type and degree of grinding of the coffee used and also on the quantity of water. Cups for normal coffee, espresso coffee and tea are not all the same size. To adjust the quantity of water desired accu- rately to the size of the cup as well, three different espresso coffee positions can be set.
By pressing | the following drinks can be selected: |
A short coffee.
A normal coffee. The quantity of coffee is the one selected, with a larger amount of water.
A long coffee. In this case too, only the amount of water supplied is altered, giving a weaker flavour.
Programming the quantity of coffee |
|
|
• Switch on the machine. |
|
|
• Select the dosage to change by pressing the | button. | |
• Make a coffee by holding the button | down until the desired quantity is obtained. | |
•This quantity will be memorized and remain the same for subsequent grindings.
To return to the original setting:
•Switch on the machine and switch it off by pressing the 
button for more than three seconds until the LED for the “coffee” button is illuminated.
•Switch the machine on again. The coffee quantity has now returned to the manufacturer’s original setting.
Setting 1 or 2 cups
It is possible to make just one coffee, or two coffees at the same time.
Choose by means of the following buttons:
One coffee
Two coffees at the same time.
! | |
|
