Hotpoint HDA130S warranty How To C~Nge Color Panels, Questions?, Use This Problem Solver

Models: HDA130S

1 16
Download 16 pages 58.85 Kb
Page 12
Image 12
HOW TO C~NGE COLOR PANELS

HOW TO C~NGE COLOR PANELS

If you are redecorating, you can change

your dishwasher’s front panels

to match or blend with your new colors.

The panel is held in place by the door trim and

the trim on the panel below the door. Each side of each panel is a different color. Or you can paint a panel with the color of your own choice.

NOTE: Do not operate the dishwasher while changing panels or when lower access panel is removed.

How to change door panel insert:

1.Take out trim screws on either side of the dishwasher door. Remove the side trim.

2.Slide out the insert panel.

3.Put the color you want in front. (Careful+dges maybe sharp).

4.Replace the insert panel, side trim and screws.

 

 

 

 

 

QUESTIONS?

 

 

USE THIS PROBLEM SOLVER

 

 

 

 

 

 

 

PROBLEM

 

 

 

POSSIBLE CAUSE

 

 

 

 

 

 

 

DISHWASHER

 

 

 

A fuse in your home maybe blown, or the circuit breaker tripped. Replace fuse or

 

WON’T RUN

 

 

 

reset circuit breaker. Remove any other appliances from the circuit.

 

 

 

 

 

 

 

UNUSUAL NOISE

 

 

 

Utensils may not be secure on rack pins, or something small may have dropped from

 

 

 

 

 

the rack. Water is causing utensils to rattle. Make sure everything is securely placed

 

 

 

 

 

in dishwasher.

 

 

 

 

 

 

 

DISHES DON’T DRY

 

 

 

Make sure inlet water temperature is correct. (See How to Test Water

 

 

 

 

 

Temperature section).

 

 

 

 

 

Unload the bottom rack first. Water from dishes in the top rack maybe spilling into

 

 

 

 

 

the bottom rack.

 

 

 

 

 

Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.

 

 

 

 

 

Check the rinse agent dispenser to see that it’s not empty.

 

 

 

 

 

 

 

UNCLEAN DISHES

 

 

 

Check inlet water temperature. It should be at least 120°F, (To test, see How to Test

 

AND FLATWARE

 

 

 

Water Temperature section).

 

 

 

 

 

Water pressure may be temporarily low. Turn on a faucet. Is water coming out slower

 

 

 

 

 

than usual? If so, wait until pressure is normal before using your dishwasher.

 

 

 

 

 

Plugged air gap. (See Care and Cleaning section).

 

 

 

 

 

Improper rack loading. (See bading section).

 

 

 

 

 

 

 

SUDS IN THE TUB

 

 

 

Sudsing detergents are not meant for dishwashers. USE ONLY AUTOMATIC

 

 

 

 

 

DISHWASHER DETERGENTS TO AVOID SUDSING.

 

 

 

 

 

To remove suds from the tub: Open the dishwasher. Let suds evaporate. Add 1 gallon

 

 

 

 

 

of cold water to the tub. Close and latch the dishwasher, Pump out water by slowly

 

 

 

 

 

turning the control dial until a drain period is reached.

 

 

 

 

 

Repeat if necessw.

 

 

 

 

 

 

12

Page 12
Image 12
Hotpoint HDA130S warranty How To C~Nge Color Panels, Questions?, Use This Problem Solver, How to change door panel insert