Hotpoint HDA130S warranty w HOW TO OPERATE YOUR DISHWASHER, For NORMAL WASH cycle

w HOW TO OPERATE YOUR DISHWASHER

STEP 1. Load your dishwasher with dishes, silverware, pots, pans, bowls, etc., according to the Loading section.

STEP 2. Add detergent to the detergent dispenser. Make sure the Cycle Indicator Dial is at OFF position before adding detergent. (See Detergent Guide).

Use rinse aid agent to help prevent spotting. Occasionally check to insure that rinse agent container is at least half full. (See How to Use a Rinse Agent section).

STEP 3. Select drying option.

DRYING

●For NORMAL WASH cycle:

a. Push selected cycle button.

b. Latch the door.

c. Slowly turn Cycle Indicator Dial to ON position to start the cycle. You will hear the motor start. There is

a time delay between the start-up and the water

fill so you will not hear any wash action right away.

DRYING HEAT ON. Turns the	HEAT ON
drying heater on for fast drying.
DRYING HEAT OFF. Turns the
drying heater off to save energy.	~
The dishes will dry naturally over	DRYING
	NFATOFF
a longer period such as overnight.
If you need your dishes sooner, open
the dishwasher door after the cycle is
complete to reduce the natural drying time.

Use of this option reduces the electrical energy used by this model approximately 10Yo for the NORMAL WASH cycle.

STEP 4. Select the wash cycle and start the dishwasher. (See Cycle Selection Hints).

●For WATER SAVER cycle: a. Be sure door is unlatched.

b. Slowly turn the Cycle Indicator Dial to the WATER SAVER position.

c. Latch door to start the cycle.

●For RINSE & HOLD cycle: a. Be sure door is unlatched.

b. Select DRYING HEAT OFF drying option.

c. Slowly turn the Cycle Indicator Dial to the RINSE & HOLD position.

WATER

washin

SAVER ●

ON . ●

OFF ●

. RIN

&HO

,,,,,

::d~lng @[

“m,

● OHYPUTE 10..,”c”

●washing

●● RINSE k HOLD

Jf:&!,

~@

● ORYPUTE WARMER ,O”,,m”e”, o”,

If your dishwasher drains into a food waste disposer, operate the disposer until it is empty before starting the dishwasher.

To obtain the benefits of a complete cycle, be careful that you do not turn the dial any farther than necessary to start the dishwasher.

d. Latch the door to start the cycle.

●For DRY/ PLATE WARMER cycle:

a. Load clean plates and dishes ~R		washing
~R ●
to be warmed.
b. Select DRYING HEAT ON
drying option.		h HOLO
		● RINSE
	●	lMY.O
c. Leave the door unlatched.		H*roFF,
		● ORYPLATEWARMfR
		(Dn!lw.,”row,

d. Slowly turn the Cycle	E
Indic;tor Dial clo;kwise
to the DRY/PLATE WARMER position.

e. Latch the door to start the cycle.

4