Hotpoint HDA2000M warranty STEP Select a drying option, STEP Stirt the dishwasher, Display Wnel

DOOR LATCH	SELECTED	TIME TO	CYCLE PHASE
“OFF” POSITION	CYCLE	END OF CYCLE
\	\	I	I

—

m\ ---

I WASHINk

NORMAL

I

/-/ /-/

UNHEATED DRY 1 1 MINUTES

STEP 4

Select a drying option

●HEATED DRY. Provides faster drying. Can be changed while cycle is running.

●ENERGY SAVER. Shuts off drying heater. Dishes air-dry naturally. It takes longer, but saves energy. You can prop door open about 3 inches after motor stops to speed drying. Excellent for overnight drying.

Energy Saver helps reduce electrical energy used by this model approximately 7%.

STEP 5

Stirt the dishwasher

●When you’re ready to wash dishes, touch the STA~ pad. There is a time delay between start-up and water fill so you will not hear any wash action right away. Dishwasher will proceed through your entire program and turn off automatically.

To change a cycle after washing stirts, touch the CLEAR/RESET pad to cancel cycle. After water is pumped out and motor stops, you can reprogram and restart the dishwasher.

Display Wnel

This panel tells you what is happening in the dishwasher and can alert you to some possible problems.

Information displayed:

●Selected wash cycle

●Selected dry option

●Minutes to end of cycle

c Cycle phase, such as WASHING, RINSING or DRYING

c Diagnostic codes to alert you to possible problems

See pages 7-9 for explanation of displays and codes.

5