Safety Information
Operating Instructions
Troubleshooting Tips
About the dishwasher control panel.
Start
Slowly turn the Dial to the START or ON position, or the selected cycle. Don’t turn it past the START, ON or cycle position, or you could accidentally miss a rinse. For models HDA2120 and HDA2130, when using the POTS & PANS cycle, slowly turn the Dial to the NORMAL/POTS
&PANS position and press the POTS & PANS ON button. When using the NORMAL cycle, slowly turn the Dial to the NORMAL/POTS & PANS position and press the POTS & PANS OFF button. See About the Dial Cycles section for other cycles on these models.
There is a time delay between
■Latch the door to begin the cycle.
About the dial cycles.
Rinse Only
HOT | START | For rinsing partial loads that will be washed later. Do not | ||
PREWASH |
|
|
| |
|
|
|
| |
OPTION | WATER SAVER | use detergent. | ||
OFF |
| |||
|
|
|
| Make sure ENERGY SAVER / HEATED DRY OFF is selected. |
|
| 1 | ||
|
|
|
| Be sure the door is unlatched. |
PLATE WARMER |
|
| 2 | |
(HEATED DRY ON) | RINSE ONLY (HEATED DRY OFF) |
| Slowly turn the Dial to RINSE ONLY. | |
|
|
|
| |
|
| 3 | ||
|
|
|
| Latch the door to start the cycle. |
|
| 4 | ||
Customer Service
HOT PREWASH OPTION | START | ||
| 2 | 1 | |
|
| ||
HOURS | 3 |
|
|
DELAY | 4 |
|
|
5 |
|
|
|
OFF |
|
| WATER |
|
|
| |
PLATE WARMER |
| SAVER | |
(HEATED DRY ON) |
|
|
|
RINSE ONLY (HEATED DRY OFF)
Delayed Start
The HOURS DELAY will allow you to delay the start time of any cycle not on the Dial automatically for up to 6 hours.
| Be sure the door is unlatched. | |
1 | ||
| Select the wash cycle and option you want. | |
2 | ||
| Slowly turn the Dial to desired time. The DELAYED | |
3 | ||
START light will come on. | ||
| ||
| Latch the door to start the cycle. | |
4 |
10
