Hotpoint HDA2200 Instructions, on glasses and, flatware, Operating, Cloudiness on, glassware

Problem Possible Causes What To Do

Safety Information

Spots and filmingExtremely hard water

on glasses and	Low inlet water
flatware
	temperature
	Overloading the
	dishwasher

•Use Jet-Dry®rinse agent to remove spots and prevent new film build-up.

•To remove stubborn spots and pre-existing film from glassware:

Operating

	Improper loading	1 Remove all metal utensils
	Old or damp powder
		from the dishwasher.
	detergent	2 Do not add detergent.
	Rinse agent dispenser
		3 Select the longest cycle.
	empty
		4 Start the dishwasher and
	Too little detergent
		allow to run for 18 to 22
		minutes. Dishwasher will
		nowbeinthemainwash.
		5 Open the door and pour
		2 cups (500 ml) of white
		vinegar into the bottom of
		the dishwasher.
		6 Close the door and allow
		to complete the cycle.
		If vinegar rinse doesn’t
		work: Repeat as above,
		except use 1/4 cup (60 ml)
		of citric acid crystals
		instead of vinegar.
Cloudiness on	Combination of soft	• This is called etching and
glassware	water and too much	is permanent. To prevent
	detergent	this from happening, use
		less detergent if you have
		soft water. Wash glassware
		in the shortest cycle that
		will get them clean.
	Water temperature	• Lower the water heater
	entering the dishwasher	temperature.
	exceeds 150°F.

Instructions

Troubleshooting Tips

Customer Service

23