How to operate your dishwasher
STEP 1. Load Your dishwasher with dishes, sil~erware, pots, pans, bowls, etc. according to the Loading section.
STEP 2. Add detergent to the detergent dispenser~Make sure the Cycle Indicator Dial is at OFF position before adding detergent. (See Detergent Guide.)
Use rinse aid agent to help prevent spotting. Occasionally check to make sure the rinse agent container is at least half full. (S~e How to Use a Rinse Agent section.)
STEP 4. Select the Cycle and start dishwasher. (See Cycie Selection Hints at right.)
If your dishwasher drains into a food waste disposer, operate the disposer until it is empty before starting the dishwasher.
To obtain the benefits of a comulete cycle, be careful that you do ndt turn the dial any further than necessary to start the dishwasher.
●For NORMAL WASH cycle:
●For RINSE & HOLD cycle: a. Be sure door is unlatched.
b. Select DRYING HEAT OFF drying option.
wATER | wash,ng |
|
| I |
|
|
| ||
SAVER ● |
|
|
|
|
ON . |
|
|
|
|
OFF ● | ● |
|
|
|
|
|
|
| |
| . RINSE |
|
|
|
| & HOLO |
|
|
|
| u;&o;;;:G |
|
|
|
d~lng @ |
|
|
| |
| ● DRYIPLATEWARMER |
|
|
|
c. Slowly turn Cycle Indicator Dial to RINSE & HOLD position.
STEP 3. Select DRYING HEAT option.
WATER
SAVER
ON .
●washing
d. Latch the door to start the cycle.
DRVING HEAT ON
B
ORVING
HEAT OFF
OFF ● ●
. RINSE & HOLD u;::,~:~G
dying @
● DRY/PUTEWARMER
a. Latch the door
b. Slowlv turn Cvcle Indicator Dial to ON” positio; to start the cycle.
●For DRY~LATE WARMER cycle:
a. Load clean plates and dishes to be warmed.
b. Select DRYING HEAT ON.
DRYING HEAT ON. Turns the drying heater on for fast drying.
DRYING HEAT OFF. Turns the
You will hear the motor start. There is a time delay between
WATER
SAVER
ON .
OFF ●
●washing
. RINSE
●& HOLD U:;:~;:~G
drying heater off to save energy. Dishes will dry naturally over a longer period such as overnight.
If you need your dishes sooner, open the dishwasher door after the cycle is complete to reduce the natural drying time.
●For WATER SAVER cycle: a. Be sure door is unlatched.
b. Slowly turn Cycle Indicator Dial to WATER SAVER position.
WATER
dying Q
● ORVIpMTEWARMER
c. Leave the door unlatched.
d. Slowly turn Cycle Indicator Dial clockwise to DRY/PLATE WARMER position.
e. Latch the door to start the cycle.
Use of this option reduces the electrical energy used by this model approximately 10~o for the NORMAL WASH cycle.
SAVE
ON .
OFF ●
d~ing
ashing
. RINSE
&HOLO
u;:::~\yG
● nRV,P1 &TFWARMFR
c. Latch door to start the cycle.
4
