Hotpoint HDA489 Wk~HBH@H, Cycle selection hints, What happens in each cycle, Drying Options

-Cycle selection hints

It is important to follow the loading instructions in the Loading Section.

NORMAL WASH—For most loads of everyday dishes, glasses and cookware with medium soils.

WATER SAVER—For dishes with light soils that have not dried on, or that have extra preparation before loading. It saves water and energy.

What happens in each cycle

●You’ll hear occasional clicking sounds:

—Soft food disposer shredding action.

—Drain valve opening to pump water out.

—Timer control as cycle progresses.

—Detergent cup opening.

RINSE & HOLD—For rinsing partial loads which will be washed later. Select DRYING HEAT OFF.

Do not use detergent.

DRYWLATE WARMER—For warming clean dishes and serving plates for the serving of hot food.

●During the drying period: —The motor stops during drying.

—Water vapor comes through the vent during drying and when water is being pumped out.

		Wash
Wash	Water Use	Cycle Time
	Gallons	(approx.	Cycle Sequence
cycle	(approx.)	minutes)
NORMAL WASH	12.1	‘7	Wk~HBH@H
WATER SAVER	8.7	46	HmHHH
RINSE & HOLD	4.9	14	HHH

Drying Options:

DRYING HEAT ON. Available on all wash cycles except RINSE& HOLD. Add 29 minutes to wash cycle time.

DRYING HEAT OFF. Drying heater is turned off. Dishes dry naturally.

5