Hotpoint HDA489 warranty The Problem Solver continued

Models: HDA489

1 16
Download 16 pages 1.77 Kb
Page 12
Image 12
The Problem Solver (continued)

The Problem Solver (continued)

PROBLEM

SPOTS AND FILMING ON GLASSES AND FLATWARE

CLOUDINESS ON GLASSWARE

CHIPPING OF CHINA

BLACK OR GRAY MARKS ON DISHES

POSSIBLE CAUSE

Spotting can be caused by all these things:

Extremely hard water. ( See How To Choose and Use Detergent Section.)

Low inlet water temperature. (See How To Test Water Temperature Section)

Overloading the dishwasher.

Improper loading. (See Loading Section.)

Old or damp powder detergent.

Phosphate level in detergent too low. (See How to Choose and Use Detergent Section.)

Rinse agent dispenser empty. (See How To Use Rinse Agent Section.)

Too little detergent. (See How to Choose and Use Detergent Section.)

Local water conditions and personal preferences vary. Try several brands of detergents to find one that gives the best results for you. A liquid dishwasher detergent may help reduce filming.

To remove stubborn spots and film from glassware:

1.Remove all metal utensils from the dishwasher.

2.Do not add detergent.

3.Select NORMAL WASH (ON) cycle.

4.Start the dishwasher and allow to run for 18 to 22 tinutes. The dishwasher will now be in the main wash.

5.Then open the door and pour 2 cups (500 ml) of white vinegar into the bottom of the dishwasher.

6.Close the door and allow to complete the cycle.

If vinegar rinse doesn’t work: Repeat as above, except use 1/4 cup (60 ml) of citric acid crystals instead of vinegar. (Most drugstores carry citric acid crystals. If yours doesn’t, call GE Factory Service.)

Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home water softener.

If vinegar or citric acid crystal rinse doesn’t work, the cloudiness is “etching”. The film cannot be removed.

It can be prevented: Use less detergent if you have soft water. Wash glassware in the shortest cycle that will get them clean.

Water temperature entering dishwasher exceeds 150°F.

Rough handling can cause chipping. Load with care. Make sure glassware and china are secure and can’t jar loose. (See Loading Section.) Make sure tall glasses and stemware will clear the top of the tub when you push the rack into the dishwasher.

Always use the top rack for delicate items.

Aluminum utensils often leave marks when they rub against dishes. Remove marks with a mild abrasive cleanser.

12

Page 12
Image 12
Hotpoint HDA489 warranty The Problem Solver continued