Hotpoint HDA6009 Cycle Selection Hints, What Happens in Each Cycle, mmmmmmm, Normal Wash, Bmmmmmm

Cycle Selection Hints

It is important to follow the Loading instructions.

●POTS & PANS—For items such as pots, pans cookware, dishes and glasses with heavy soil. Everyday dishes may be included.

●NORMAL WASH—For loads of everyday dishes, glasses and cookware with medium soils. Designed to yield high performance on normal soils.

●WATER SAVER—For dishes with light soils that have not dried on, or that have extra preparation before loading. It saves water and energy.

●RINSE & HOLD—For rinsing partial loads which will be washed later. D{) not u.~e detergent.

●PLATE WARMER—For warming clean dishes and serving plates for the serving of hot food.

What Happens in Each Cycle

●You’ II hear occasional c1 icking sounds: —Soft food disposer shredding action. —Drain valve opening to pump water out. —Timer control as cycle progresses. —Detergent cup opening.

●During the drying period: —The motor stops.

—Water vapor comes through the vent by the door latch during drying and when water is being pumped out.

	W:l[el” use	Wosh cycle
		Time
	Gallons	Minutes
Wash (:ycles	(:ipprox,)	(Llppl”ox.)	Cycle Sequence
POTS & PANS	I 1.4	95:1:	mmmmmmm
		~~:1:
NORMAL WASH	1 I.4		Bmmmmmm
	~,~	~fi:,:
WATER SAVER			mmmmm
	3. I	10
RINSk; & HOLD			mm

‘}: Unextended times. These cycle times will be incrc:iscd appr(]ximately 9 minutes if Water Hc~I[ energy option” is selected.

Drying Options:

HEATED DRY. Avtiilable on till wash cycles cxccpt RINSE & HOLD. Add 29 minutes to wush cycle time.

ENERGY SAVER. Drying heater is turned off’. Dishes dry nuturally.

Good dishwashing starts with HOT water

To get dishes clean and dry you need hot water. To help you get water of the proper temperature, your dishwasher has a WATER HEAT feature that automatically senses the temperature of the water

in the wash cycle and heats it, if necessary, to the proper temperature. This water heating feature may allow you to turn down your household water heater and save energy if you’re willing to let the dishwasher run a little longer while it heats water to the proper temperature. For good washing and drying, the entering water must be at least 120°F. To prevent dish damage, inlet water should not exceed 150°F.

5