Hotpoint HM311i manual Electrical Supply, Fuses, Changing the Plug, Changing the Mains Lead

Models: HM311i

1 19
Download 19 pages 15.11 Kb
Page 2
Image 2
IMPORTANT INFORMATION:

IMPORTANT INFORMATION:

Do not plug in and switch appliance on at the mains until installation is complete.

You may be charged for a service call if a problem with your appliance is caused by incorrect installation or misuse.

Electrical Supply

WARNING: This appliance must be earthed.

Fuses

Your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. Correct replacement is identified by colour coding or the marking on base of plug.

WARNING: Do not use plug unless fuse cover is fitted.

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

Green/Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of wires in the mains lead may not correspond with the colour of the markings identifying terminals in the plug. You should therefore wire it as shown.

Changing the Mains Lead

A special lead can be ordered from our Service Department

UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

Green and yellow (Earth) wire to terminal marked ‘E’,

symboL, Electrical Supply or coloured green and yellow.

Blue (Neutral) wire to terminal marked ‘N’ or coloured black.

13A ASTA approved fuse to BS1362.

Brown (Live) wire to terminal marked ‘L’ or coloured red.

Cord clamp

If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

CE marking certifies that this appliance conforms to the following EEC directives:- Low Voltage Equipment - 72/23/EEC & 93/68 EEC

Electromagnetic Compatibility - 89/336/EEC, 92/31/EEC & 93/68/EEC

WARNING: AVOID ACCIDENTS TO CHILDREN. WHEN DISCARDING AN OLD FRIDGE OR FREEZER BE CERTAIN TO MAKE THE LOCK UNUSABLE. IF POSSIBLE, REMOVE THE DOOR AND DISCARD SEPERATELY.

DO NOT ATTEMPT TO SIT ON TOP OF YOUR APPLIANCE. IT IS NOT DESIGNED FOR SUCH USE AND YOU COULD INJURE YOURSELF OR DAMAGE THE APPLIANCE BY SUCH ABUSE.

2

Page 2
Image 2
Hotpoint HM311i manual Electrical Supply, Fuses, Changing the Plug, Changing the Mains Lead, Important Information