Installation

SPACE FOR FIXING

GB The cooker can be close fitted below hotplate level. This requires a minimum distance of 600mm between cupboard units of hotplate height.

When installing next to a tall cupboard, partition or wall, for a minimum distance of 400mm above hotplate level, allow a side clearance of at least 65mm.

The diagram below illustrates the minimum clearance between the cooker and adjacent walls, cupboards etc.

The wall behind the cooker, 50mm below and 450mm above, and the width of the cooker, must be a non- combustible material such as ceramic wall tiles.

If the cooker is to be fitted close to a corner on the left hand side, ensure that there is a clearance of at least 50mm to allow the main oven door to open fully for when removing oven shelves.

mmMin

Min

 

750mm

65 mm Min

400

 

 

 

600 mm Min

 

COOKER HOODS

If a cooker hood is to be installed, refer to the cooker hood manufacturers' instructions regarding fixing height.

UNPACKING THE COOKER

Unpack the components from inside the grill and oven.

Check that the following parts are present:

Grill pan and grid

Aluminium burner bodies(4)

Baking dish

Pan supports

Main oven shelves (2)

Enamelled burner caps (5)

Top oven/grill shelf (1)

Literature

LEVELLING

Four skid feet are fitted which can be adjusted up or down to level the cooker.

CONVERSION FOR USE ON BUTANE (G30) OR PROPANE (G31)

Each burner requires the injector to be replaced and bypass screws adjusted or replaced as follows:

1.Remove the loose hotplate burner parts.

2.Using a 7mm socket, replace the hotplate injectors as appropriate (see table on previous page).

3.Re-position the loose burner parts.

4.Carefully pull off the hotplate control knobs.

5.Using a narrow flat bladed screwdriver rotate the bypass screws fully clockwise. The hotplate tap bypass screws are located down the centre of the spindle.

6.Re-assemble the control panel parts.

7.Secure the self-adhesive LPG conversion label over the gas details on the data badge.

STABILITY CHAIN

A hole in the gas inlet valve bracket can be used to engage a stability chain.

CONNECTING TO GAS SUPPLY

670

300

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

Those cookers converted to use on LPG should be connected with a hose suitable for LPG and capable of withstanding a pressure of 50 mbar.

An adaptor backplate should be fitted within the shaded area shown, to allow the cooker to be pushed fully to the wall and to ensure that the flexible hose is only likely to come into contact with areas at the rear of the cooker that do not exceed a temperature rise of 70°C.

6

Page 6
Image 6
Hotpoint HUD61 manual Levelling

HUD61 specifications

The Hotpoint HUD61 is a versatile and stylish built-in double oven designed for modern kitchens. With its sleek appearance and advanced features, this appliance provides both functionality and aesthetic appeal.

One of the standout features of the Hotpoint HUD61 is its impressive cooking capacity, allowing for simultaneous cooking of multiple dishes. The dual oven design includes a large main oven with a capacity of 65 liters and a smaller secondary oven with 39 liters. This arrangement makes it easy to prepare large meals or multiple courses without the hassle of juggling oven space.

The HUD61 is equipped with a fan-assisted cooking system that promotes even heat distribution throughout the cooking space. This technology ensures that dishes cook evenly, reducing the likelihood of hotspots and undercooked areas. The fan also helps to circulate air, which is particularly useful when baking or roasting, leading to beautifully cooked meals every time.

Another key feature of the Hotpoint HUD61 is its programmable digital timer. This intuitive control panel allows users to set cooking times and temperatures, streamlining the cooking process. Whether you're baking, roasting, or grilling, the precise control of the timer means you can achieve perfect results without the constant need to monitor your dish.

For those who appreciate the ease of cleaning, the HUD61 comes with catalytic ovens, which utilize a special coating on the oven walls to break down grease and grime at high temperatures. This means less time spent scrubbing and more time enjoying your culinary creations. Additionally, the oven doors are designed to be easily removable, making the cleaning process even more straightforward.

Energy efficiency is another important aspect of the Hotpoint HUD61. It boasts an excellent energy rating, allowing users to cook delicious meals without impacting their energy bills significantly. This sustainable approach to cooking is increasingly essential for eco-conscious consumers.

In conclusion, the Hotpoint HUD61 is a well-rounded appliance that combines modern technology with practical features. Its spacious double oven, fan-assisted cooking, programmable timer, and easy-clean design make it a valuable addition to any kitchen. Whether you're an amateur cook or a seasoned chef, this oven is designed to help you achieve culinary excellence with ease.