Connecting the drain hose

• the supply voltage is included within the

GB

values indicated on the Technical Data Plate

 

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situa- ted between 65 and 100 cm from the floor;

fixed on the machine.

•the socket is compatible with the washing machine’s plug. If this is not the case, repla- ce the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Be- fore connecting the drain hose from the machine ensure that any blanks or remo- vable ends have been taken off the spigot.

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be under- water.

THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRI- CIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the colou- red marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pu- shed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance’s maximum power load indicated on the Tech- nical Data Plate fixed on the machine;

If your appliance has a non-rewireable moul- ded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere rewireable plug bearing the BSI mark of ap- proval.

or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternati- ve plug:

Important: the wires in the mains lead are co- loured in accordance with the following code:

Green & Yellow Earth

BlueNeutral

BrownLive

3

Page 2 Page 4
Page 3
Image 3
Hotpoint HULT 763 manual Replacing the fuse
Page 2 Page 4

HULT 763 specifications

The Hotpoint HULT 763 is a cutting-edge washing machine designed to meet the demanding needs of modern households. With its sleek design and user-friendly interface, this appliance brings efficiency and convenience to your laundry experience.

One of the standout features of the Hotpoint HULT 763 is its impressive washing capacity. With a generous drum size, it can handle large loads, making it ideal for families or individuals who regularly deal with a significant amount of laundry. This capability not only reduces the number of washes required but also saves time and energy in the long run.

The Hotpoint HULT 763 is equipped with advanced technologies that enhance its washing performance. The device features various washing programs tailored to different fabric types and soil levels. Whether you're cleaning delicate garments or heavily soiled work clothes, this machine has a setting that ensures optimal results. The rapid wash function is a game-changer for those in a hurry, allowing for quick cycles without compromising on cleanliness.

In addition to its diverse wash cycles, the HULT 763 utilizes innovative technologies such as the ActiveCare system. This feature actively removes up to 100 stains at just 20 degrees, making it an eco-friendly choice that doesn’t sacrifice performance. The machine's dedicated stain removal functionality effectively tackles common household stains, ensuring your clothes stay fresh and look new for longer.

Another notable aspect of the Hotpoint HULT 763 is its energy efficiency. With an impressive energy rating, it not only consumes less power but also contributes to lower utility costs. This efficiency is supplemented by the machine's quiet operation, making it suitable for use in apartments or homes where noise is a concern.

Moreover, smart technology integration is a key characteristic of the HULT 763. The washing machine can connect to your smartphone, allowing you to control wash cycles, receive alerts, and monitor progress from anywhere in your home. This level of connectivity makes it easier to manage your laundry tasks around a busy schedule.

In conclusion, the Hotpoint HULT 763 combines practicality, advanced technology, and efficiency to deliver an exceptional laundry experience. With its robust features and user-friendly operation, it stands out as a reliable choice for anyone looking to enhance their home laundry system.
Top Page Image Contents