Description of the washing machine and starting a wash cycle
GB | Control panel |
|
ON/OFF button
| WASH CYCLE PROGRESS indicator | |
| lights |
|
| SPIN SPEED |
|
| knob | DOOR |
|
| |
TEMPERATURE |
| LOCKED |
knob |
| indicator light |
Detergent dispenser drawer
WASH CYCLE
knob
FUNCTION
buttons with indicator lights
START/PAUSE
button with indicator light
Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”).
ON/OFF button: switches the washing machine on and off.
WASH CYCLE knob: programmes the wash cycles. During the wash cycle, the knob does not move.
FUNCTION buttons with indicator light: used to select the available functions. The indicator light corresponding to the selected function will remain lit.
SPIN SPEED knob: sets the spin speed or exclude the spin cycle completely (see “Personalisation”).
TEMPERATURE knob: sets the temperature or the cold wash cycle (see “Personalisation”).
WASH CYCLE PROGRESS indicator lights: used to monitor the progress of the wash cycle.
The illuminated indicator light shows which phase is in progress.
DOOR LOCKED indicator light: indicates whether the door may be opened or not (see next page).
START/PAUSE button with indicator light: starts or tem- porarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this button; the corresponding indicator light will flash orange, while the indicator light for the current wash cycle phase will remain lit in a fixed manner. If the DOOR LOCKED 
indicator light is switched off, the door may be opened (wait approximately 3 minutes).
To start the wash cycle from the point at which it was inter- rupted, press this button again.
Standby mode
This washing machine, in compliance with new energy sa- ving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the
Consumption in
Consumption in
8
