Gas connection

The cooker should be connected to the gas-supply by a corgi registered installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing. Connection of the appliance to the gas mains or liquid gas must be carried out according to the prescribed regulation in force, and only after it is ascertained that it is adaptable to the type of gas to be used. If not, follow the instructions indicated in the paragraph headed “Adaptation to different gas types”. On some models the gas supply can be connected on the left or on the right, as necessary; to change the connection, reverse the position of the hose holder with that of the cap and replace the gasket (supplied with the appliance). In the case of connection to liquid gas, by tank, use pressure regulators that conform to the regulation in force. The gas supply must be connected to the left of the appliance. Be sure that the hose does not pass through the rear of the cooker touching hot parts.

HOT PARTS

600 mm

Important: make sure the supply pressure conforms with the values shown in the table entitled “Caracteristics of the burners and nozzles”. When the cooker is installed between cabinets (recessed), the gas connection must be effected by an approved flexible hose with bayonet fitting (BS 669 Current Edition).The gas inlet for the cookers is a threaded G 1/2 gas female fitting.

Connecting the gas supply

To make the connection, a flexible hose should be used corresponding to the current gas regulations which are:

•the hose must never be at any point in its lenght in contact with the “hot” parts of the cooker;

•the hose must never be longer than 1,5 metre;

•the hose must not be subject to any tension or torsional stress and it must not have any excessively narrow curves or bottlenecks;

•the hose must be easy to inspect along its entire length to check its condition;

•the hose must always be in good condition, never attempt to repair.

Important: the installation must comply with gas safety (installation and use) regulations 1984. In all cases for the above, by low, a qualified, corgi approved engineer must be called for installation.

Important: Before using the oven, position the oven burner deflector "A" (provided with the appliance) in the correct place by inserting the lower tab into the support slot (see figure).

A

5

Page 4 Page 6
Page 5
Image 5
Hotpoint HW170GIW, HW170LIW, HW170LIK, HW170GIK manual Gas connection, Connecting the gas supply
Page 4 Page 6

HW170GIK, HW170LIK, HW170GIW, HW170LIW specifications

The Hotpoint HW170LIK, HW170GIW, HW170LIW, and HW170GIK are part of Hotpoint's innovative line of washing machines, designed to offer advanced technology and high efficiency to meet modern laundry needs. These models combine practicality with cutting-edge features, making them suitable for various households.

One of the standout characteristics of these washing machines is their impressive capacity. With a wash load of 7 kg, they are ideal for families or individuals with substantial laundry requirements. The front-loading design ensures easy access and loading, while also enhancing the machine's energy efficiency and effectiveness during the wash cycle.

In terms of performance, the Hotpoint HW170 series is equipped with a powerful inverter motor. This technology not only ensures quieter operation but also contributes to the longevity of the appliance by reducing wear and tear. Users will appreciate the smoothness and reliability that comes with this motor, enhancing the overall user experience.

These models also incorporate the Anti-Stain technology, designed to tackle tough stains effortlessly. This feature employs a combination of wash actions and water temperature adjustments, ensuring optimal stain removal without compromising the integrity of the fabric. Users can rely on this technology for various fabric types, allowing them to maintain their clothing's appearance over time.

Energy efficiency is a critical consideration for modern appliances, and the Hotpoint HW170 series excels in this area. With an A+++ energy rating, these machines not only help reduce energy bills but also promote environmentally-friendly practices. The Eco cycle is particularly useful for those looking to save water and energy during less intensive wash loads.

In addition to these features, the Hotpoint HW170 models boast a range of customizable wash programs, allowing users to select the most suitable cycle for their specific needs, whether it’s a delicate wash or a quick 30-minute cycle for urgent laundry tasks. The digital display panel offers intuitive controls, making it easy to navigate through settings and options.

Safety is also a pivotal consideration in the design of these washing machines. Features such as the child lock ensure that little hands cannot accidentally alter settings during a wash. The machines are also designed with a robust build quality, offering durability and reliability for long-term use.

In conclusion, the Hotpoint HW170LIK, HW170GIW, HW170LIW, and HW170GIK models epitomize the blending of functionality with efficiency. With their advanced technologies, customized programs, and eco-friendly credentials, these washing machines are a perfect addition to any modern home, offering users peace of mind while ensuring their laundry needs are fully met.
Top Page Image Contents