ASSEMBLING THE
HANDHELD STEAM CLEANER
CONNECTING UTILITY BRUSHES
NOTE: Both Nylon Utility Brushes and the Brass Utility Brush are attached in the same manner.
1.Begin by aligning
FIGURE 4
2.Firmly press Utility Brush onto tip of Jet Nozzle (FIGURE
IMPORTANT: Make sure accessory is pushed as far as possible onto tip to ensure that it is properly set in place and space between the accessory and the Jet Nozzle is sealed (FIGURE
A
B
FIGURE 5
3.To remove Utility Brush, make sure unit is unplugged and has had sufficient time to cool down. Then simply grasp Brush and firmly pull until it disconnects from Jet Nozzle.
8 | Top Innovations, Inc. |