CARE & STORAGE GUIDELINES
PROPER STORAGE
Preparing your Handheld Steam Cleaner for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below.
1.Unplug power cord from electrical outlet.
2.Allow unit to cool for at least 30 minutes. Press Steam Button to release remaining steam pressure.
3.Remove all connected accessories from unit.
4.Unscrew and remove Boiler Cap. Drain any water remaining in Boiler into a sink or tub - this will help to minimize potential mineral
5.Loosely replace Boiler Cap - do not screw on tightly, as this may make it difficult to remove for next use.
6.Wrap power cord loosely around unit. Store Handheld Steam Cleaner in a cool, dry location, along with all included accessories.
MINERAL BUILD-UP
A common maintenance need for steam appliances is the removal of
The best way to minimize mineral
To clean Boiler:
1. Unplug power cord from electrical outlet.
IMPORTANT: Unit should remain unplugged during rinsing procedure.
2. Allow unit to cool for at least 30 minutes. Press Steam Button to release remaining steam pressure.
3. Remove all connected accessories from unit.
4. Unscrew and remove Boiler Cap, then drain any water remaining in Boiler into a sink or tub.
5. Using Measuring Cup, make a mixture of approximately 3 oz. (89 ml.) vinegar and 3 oz. (89 ml.) distilled water.
NOTE: For best results, it is highly recommended that distilled or
6. Slowly pour
7. Allow
8. Drain
9. Thoroughly rinse Boiler with fresh water until vinegar odor dissipates, then replace Boiler Cap.
12 | Top Innovations, Inc. |