Installation

GB

! Before placing your new appliance into operation

please read these operating instructions carefully. They

 

 

contain important information for safe use, for installation

 

and for care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or

to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of

approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

2

Page 1 Page 3
Page 2
Image 2
Hotpoint KSF1622, HS1621 operating instructions Installation, Positioning and connection
Page 1 Page 3

HS1621, KSF1622 specifications

The Hotpoint KSF1622 and HS1621 are both notable models in the realm of kitchen appliances, designed to enhance convenience and efficiency for everyday use. These refrigerators stand out due to their advanced features and user-friendly characteristics, making them popular choices among consumers.

The Hotpoint KSF1622 model is a spacious three-door refrigerator that combines a contemporary design with practicality. One of its main features is the No Frost technology, which prevents ice buildup and eliminates the need for manual defrosting. This innovation ensures that food stays fresh while maximizing storage space. The KSF1622 also boasts an A+ energy rating, making it an environmentally friendly option that helps reduce electricity bills.

Additionally, this model is equipped with Smart Temperature Control, an advanced system that maintains optimal conditions for various food types. This feature actively monitors and adjusts the internal temperature, maintaining freshness and extending the shelf life of perishables. The integrated MultiAirFlow system ensures even air distribution throughout the fridge, preventing temperature fluctuations and allowing for better food preservation.

On the other hand, the Hotpoint HS1621 is a stylish two-door fridge that offers ample storage capabilities while being compact enough to fit in kitchens of various sizes. This model also incorporates the No Frost technology, making maintenance hassle-free. The HS1621 is designed with convenience in mind, featuring adjustable shelves and ice cube trays that allow for easy customization based on individual needs.

Both models share several characteristics that make them standout choices, including energy-efficient LED lighting, which illuminates the interior without increasing power consumption. Furthermore, Hotpoint’s commitment to quality is evident in the durable materials and finishes used in these refrigerators, providing longevity and style.

In conclusion, the Hotpoint KSF1622 and HS1621 models are exemplary choices for consumers looking for efficiency and reliability in their kitchen appliances. With their innovative technologies, user-friendly designs, and energy-efficient features, they effortlessly meet the needs of modern households while preserving the quality of food and minimizing environmental impact. Whether you prioritize space, style, or advanced functionality, these Hotpoint refrigerators offer a well-rounded solution for all your refrigeration needs.
Top Page Image Contents