Hotpoint KSF1622, HS1621 Troubleshooting, Malfunctions, Possible causes / Solutions, cool well

Models: HS1621 KSF1622

1 12
Download 12 pages 45.58 Kb
Page 8
Image 8
Troubleshooting

Troubleshooting

GB

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

 

Malfunctions:

Possible causes / Solutions:

The internal light does not illuminate.

• The plug has not been inserted into the electrical socket, or not far

 

enough to make contact, or there is no power in the house.

The refrigerator and the freezer do not

• The doors do not close properly or the seals are damaged.

cool well.

• The doors are opened too frequently.

 

• The TEMPERATURE ADJUSTMENT knob is not in the correct position

 

• The refrigerator or the freezer have been over-filled.

The food inside the refrigerator is beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

The back wall of the refrigerator unit is covered in frost or droplets of water.

There is water at the bottom of the refrigerator.

The TEMPERATURE ADJUSTMENT knob is not in the correct position.

The food is in contact with the back inside wall of the refrigerator.

The door is not closed properly or is continuously opened.

The outside ambient temperature is very high.

The appliance has not been installed on a level surface (see Installation).

The appliance has been installed between cabinets that vibrate and make noise.

The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

This shows the appliance is operating normally.

The water discharge hole is blocked (see Maintenance).

8

Page 8
Image 8
Hotpoint KSF1622 Troubleshooting, Malfunctions, Possible causes / Solutions, The internal light does not illuminate